Zoku Round Pop Molds

Love these popsicle molds. Can make healthier popsicles at home, cleans easily, holding up nicely. The stick is sturdy, and has a little ledge to catch drips. Only drawbacks: only makes 4 popsicles, so it's fine for 1 or 2 kids, but not enough for a party. The popsicle is a little thick, so it is hard for smaller kids to get it in their mouths, but they end up figuring it out.

Perfect size for someone watching their calories. As for child safety, the stick comes in 2 pieces that snap together, which could be a potential choking hazard if you aren't watching the little ones closely. As for the popsicle itself, it would be difficult for them to put the whole thing in their mouth so that design might be a good thing. Love that the base is sturdy and not just a flat piece of plastic where the popsicles can fall over if bumped. Easy to pull the popsicle out of the silicone pouch. Easy to clean the pouch as you can turn it inside out to make sure you cleaned it all. So far I'm very satisfied with it. It recommends freezing the popsicles for 6 or more hours but mine were done overnight.

These are great molds, easy to use and clean. It's also easy to get the popsicle out of the mold. The size is good and the shape is fun but a bit wide so it's a stretch to get your mouth around it and the kids cannot do that which leads to more drips. If you have jaw issues or you are doing it for the kids consider the red tray tiny pop molds they make.

I love these molds. I've made popsicles of yoghurt and berries, also some of eggnog and nutmeg, and I now have some chilling in the freezer of coconut milk with raspberries and blueberries. They're easy to use, especially as you don't have to run the popsicles under hot water to get them out of the mold. They're also easy to clean, don't take up much space in the freezer, and a good product all around. Nice option for healthy snacks. I don't think you can go wrong buying them.

What I love about these popsicle molds is that that is so east to remove them without scraping yourself. You just squeeze the flexible plastic mold and it comes right out. The only think I don't like is that the shape of the hard plastic mold that the soft plastic sits in takes up a lot of room in the freezer. It would be better if they came in a row instead of a square. My grandson doesn't like these popsicles as much because he can't bite into them as easily. And I really don't like that they are completely sold out! Please make more so I can replace all of my old, hard-to-remove popsicle molds.

I really like this brand (Zoku) and the first popsicle mold I got from them, but this one has three flaws. 1) The silicone sleeve is kind of hard to pull off the pops, especially the first few times you try. 2) These are really big popsicles and because they are thick rather than long and narrow it takes longer for them to freeze. Which means waiting longer and: 3) the ice crystals that form are larger, so the popsicles are crunchier. I make fruit puree pops, which usually results in a very smooth pop, but not so much with this set. The quality of construction and materials is top notch, but the design results in in a less than ideal pop in the end, at least for me.

I can choose real juice and fruit to freeze and that makes them healthy. The size is great but it does take up a lot of space. You don’t have to worry about leakage because the mold is designed well to protect the cups.

Zoku Round pop molds make great popsicles. Handle works great after popsicle is pulled out. Popsicle comes out easily. It is easy to rinse off the film of frozen juice from inside the silicon mold after popsicle is peeled off. Juice flavor makes the color of the popsicle. Purple is from blueberry, red is from strawberry, and yellow is from orange juice and mango puree. I don't know where blue popsicle color comes from. Definitely, children enjoys the shape of the popsicle. One for each person in the households, there's a New favorite pop mold shape to introduce different juice camouflaged inside the popsicle for child and adult.

Mir gefallen die Zoku-Eisformen für rundes bzw. ovales Stieleis sehr gut. In jede einzelne Form passen etwa 90 mL. Das hört sich zuerst wenig an, ist aber ausreichend - auch für erwachsene Eisliebhaber. Für ganz kleine Kinder könnte es von der Menge eventuell sogar etwas zu viel sein. Habe es allerdings mit Kindern noch nicht ausprobiert (vielleicht schaffen sie es ja doch). Sehr praktisch finde ich die herausnehmbaren Silikon-Formen aus der Halte-Form (Hartplastik). So ist es möglich, einzelne Silikon-Formen wieder zu füllen, ohne die gesamte Halte-Form mit den restlichen Eis am Stiel aus dem Gefrierschrank zu holen. Sehr positiv überrascht hat mich der Geruch, der beim Auspacken nicht oder nur ganz gering zu vernehmen war. Nach dem ersten Abwaschen und Gebrauch nehme ich keinen Geruch mehr wahr. Auch die Stiele mit dem Tropf-Stopp (beides Hartplastik) haben keinen unangenehmen Plastikgeruch. Außerdem finde ich sehr praktisch, dass der Stiel vom Tropf-Stopp getrennt werden kann und so platzsparend aufzubewahren ist. Das Ausziehen der leckeren Eis-Kreationen funktioniert perfekt. Ein Antauen ist nicht notwendig. Einfach Eis am Stiel aus dem Gefrierschrank holen, Silikon abziehen und Eis genießen. Rund um ein gelungenes Produkt, das hoffentlich einige Jahre Eis produzieren kann, ohne kaputt zu gehen... Für heiße Sommertage und auch wenn Besuch ansteht, könnte ich fast noch eine zweite Zou-Form gebrauchen, die ich mir sicher nächstes Jahr zulegen werde. An den Hersteller: Einen Extrastern würde ich vergeben, wenn es Stiele mit Tropf-Stopp separat nachzukaufen gäbe.

Product is good. Delivery on time.

I’ve been searching for an easy-to-use popsicle mould for quite some time since the regular plastic ones in the market are a bit of a hassle to handle and tricky to clean. I am loving this Zoku product because it’s so chic, and easy to fill and clean. The popsicle shape is so original and fun. The outer casing is hard plastic, but the inner mould is silicone and it peels off easily to unmould. There is no need to run it under water to unmould. Compact enough for my freezer. I use a funnel to fill the moulds without spills, although tiny spoons can also be used.

These are fantastic. I've had several lolly pop moulds and these are by far the best. The product has four moulds together, and for each one there is a separate mould into which you pour in the liquid and put in the stick/handle provided. Just make sure you put the stick in the right way... Shorter end goes into the liquid... As I learnt when everyone laughed at me! The stick fits in really nicely, so sits in the centre, and when in uses there is a little lip acting as a dribble tray. I was worried that they would not fit in the freezer draw height wise, but they are a perfect fit. And I actually now leave the main mould in the freezer and just fill up the individual moulds and put it back in after each time we have a lolly. When frozen, the individual mould comes off easily and pops back in shape so if left lying around it does not stain anything. And they are an ideal size. Great product, highly highly recommended!

davvero un prodotto perfetto! ho preparato diversi tipi di ghiaccioli e sono: - pratici e facili nell'utilizzo; - hanno una sorta di "salvagoccia" che anche se il ghiacciolo si scioglie un pò protegge la mano; - l'involucro in silicone permette di estrarre con facilità il ghiacciolo senza causarne danni. davvero un ottimo prodotto.