OTC 6007 Lower Control Arm Prying Tool, Black

Works great

Really great for prying down stiff lower control arms that were replaced

This is tough as nails. When I got it I couldn't quite figure it out. I knew I would need a pry bar but it didn't come with instructions. The first attempt at using it, the technical mind kicked in immediately and it was simple and effective. Get a long pry bar, strong rod or pipe at least 1.5 times the length of the lower control arm. Instructions: 1. Remove ball joint nut (or slacken if you don't have space) and free up ball joint stud from steering knuckle by your regular method. 2. Hang the hook on the lower control arm (the hole should be below. the side you choose will depend on the shape of the arm to gain more leverage but it will work on either side if you complete the 3rd step properly). 3. Pass your pry bar (or any strong bar/pipe) through the hole. 4. Ensure the other end of the pry bar connects properly with the inned part of the lower control arm, so it won't slip. 5. Pry downward on the handle of pry bar until the ball joint stud is out of the steering knuckle.. (If there was not enough space to remove the ball joint nut before, back it off, all the way at this step, until you can push the control arm down enough.) 6. Pull/push steering knuckle away from ball joint while maintaining a downward force on the pry bar. When reinstalling the arm to the steering knuckle, follow steps 2 to 5. It's a one-man job and there's no more slipping! I was going to buy the other tool that's very long and many times more expensive but I decided to try this first. Buy it!

very useful tool, worth every penny

Excellent for hard to get to control arms

This prying tool is so simple yet so effective . Making prying lower control arms easy and hassle free. Needs to be in every technicians tool box

Sometimes a very very simple yet subtly elegant solution to a common problem presents itself, and you look at that solution and think it could never work. With this one you'd be dead wrong. Everyone that works in my field has this issue. Where the hell do I put this damn prybar to get this (strut, ball joint, axle) out of this thing when I can't pry down on it anywhere? Grrrrrr This works. And it's so simple and strong too. The straight end just sits on the lower arm just behind or in front of the ball joint, you pass your bar through the loop. That's it. That's really it in not kidding. Note: this will fit the gihugeic colossal prybar thing that Mayhew makes I think it's called the dominator or something. It fits. It's cheap, good brand, works. Why are you still reading your fool hit buy now already sheesh

Very strong

Strong material but you still have to apply some WD40 or degreaser or rust penetration for the best result. Overall I’m happy with this item.

Muy fácil de usar

Every tech needs one, for the price this is an absolute must have so simple yet soo damn effective! You won’t regret getting it.

Works well, makes it easy solo