Square Single Port USB 3.0 Panel Flush Mount Extension Cable with Buckle for Car Truck Boat Motorcycle Dashboard 1ft | Car Mount Flush Cable with Buckle for Car Truck Boat Motorcycle Dashboard

The cable is nice and thick and the whole thing is great quality. I was able to use it very easily and it is very compatible with just about any installation surface you can think of. Overall very pleased with how it looks after install.

Works perfect 👍 Use a small hot knife or wood burner tip to shape the plastic to the right size hole. Little trimming here and there and it looks great

I bought this USB port to use with the factory Audi Concert radio in my Audi TT. My car is a 2001 and has a telephone jack in the center console that was originally used for a mobile phone. It came this way brand-new. The mobile phone is long gone but the jack is there. I recently bought an iPod adapter to work with the Concert radio and wanted to put the USB port somewhere other than just sticking it in the glove box. Since the telephone port was there, I found a USB port that looked like it'd fit and bought it. That's this one here. It is almost the right size to fit in the factory telephone plug spot. I had to alter it slightly to get it to fit perfectly. I took about a millimeter off of the bottom and I cut a chamfer into the top using my rotary tool. That let the USB port fit flush. The retaining tabs grabbed the plastic and it fits really well but with a bit of jiggling, I could pull it out. The end is not hard plastic. It is a rubbery material and is flexible. I 3D printed a bracket which screws where the factory screws did, and which holds the USB port securely in place. If you want to print out the same bracket for your Audi, I've uploaded it to Thingiverse. Search for Audi USB port bracket there and you'll find it and can download it for free. I am happy with the results. It looks like it was put there by Audi and I can plug in my phone or iPod and have it charge while sitting on the passenger seat. Other reviewers provided the dimensions and I found they were similar to what I measured. I measured 19mm x 11mm for the size of the body. You'll want a 21mm x 12mm hole for it to fit properly.

I used a exitin inset to make a e rectangular whole and it looks great I tried to retuned because the usb is kind of hard to get in (too tight) but I hope it will get a little loose with the use Other than that it works great

Great Quality, great price! Does what it should and is USB 3.0 rated. Cable is a good thick durable material…. And that how I like everything… thick layers of icing. Thick thighs. Thick cuts of bacon…. Just thick eerythang…. Including the insulation on these cable ports!!!!

Daughter has a Pontiac vibe and I replaced her radio and she was looking for a way to connect a telephone to the radio well the back of the radio has a USB-A connection on the back of it and it had a 120 V adapter option from the manufacturer of the automobile that she never used and it just so happens that this USB device snapped perfectly into the hole and has allowed my daughter to connect her phone to her car radio seamlessly I personally did not have to do any modifications to the dash or to the radio very easy to install, and the fit was perfect.

I purchased this to add a dashboard USB adapter for my Kenwood Stereo . product is well constructed and passes data to my stereo with USB 3 speeds. I was so pleased with it, that I bought additional when I added a similar stereo to my other car.

Not a standard fit for the pop out ports. Installed in a 2008 Toyota rav4 and was fairly easy. The port itself is a bit smaller than the hole from the pop out insert so it’s falls out. Had to use electrical tape to make it fit.

Llego demasiado rapido

ナビからのUSBケーブルを、自動車のダミーのスイッチパネルに埋め込むために購入しました。 ダミーのスイッチパネルを穴あけ加工して取付けましたがちゃんと引っかかるツメもあり綺麗にしっかり取付けできました。

Works good. Does pretty much what you want it to do. It's visible in the picture, but be aware this does not fit into a round hole. You need to make a hole, then lots and lot of filing to make the hole rectangular. Not a big deal if this will be installed in plastic. If you want to install a panel-mount USB port in steel or stainless sheet metal then you have a lot of work ahead of you.

Delivered quickly, works fine

車載用に買い求めました。パネルマウントにするので角穴を開けるのだけど、穴寸法などの資料はないから現物合わせで空ける必要がある。あと、抜け止め用の爪の形状があまりよくない。アルミやスチールの薄板用の形状なので、板厚のある樹脂パネルに取り付ける場合は爪のほうを加工しないと抜け止めとして機能しない。爪の強度も材質的に怪しいので、爪が折れる場合もあるかもしれません。