Freenove I2C IIC LCD 1602 Display Serial 16x2 Screen New Type (2 Pack)

Easy to use I2C lcd display. I use these with Arduinos, and they work just fine.

worked perfect

Excellent product just 4 wires to connect and no tuning required

Easy to use via i2c. Obviously only 16x2 characters so you need to be sure that is sufficient for your needs. Only minor gripe is that display is virtually unreadable without the backlight, which itself is quite bright. Would be nice to control brightness of displayed data. The only other thing to watchout for is that supply voltage needs to be 5v not 3v3. I didn't pay attention and initially used 3v3 from pico. Everything appeared to work except no data displayed. Everything else seemed to work, including the backlight. As soon as I switched to 5v, bingo.

After using the old how many pins 🫣 versions, going to their newer models has been a godsend, especially with the lack of extra wires around the breadboard. They are good quality and both of them work fine on my project. 👍

Great quality, just what I needed for my project

I found these unusable. The I2C comms is so unreliable that the display would not stay stable for more than a few seconds; I tried different driver libraries but it made no difference. The optical quality is not great either but probably not help by being unable to adjust the contrast. Swapped to a display with separate I2C PCB attached and no problems since, plus the contrast can be adjusted with a pot!

Great LCD's easy to wire and add to any config files.

Great for messing around with and easy to get working. worth the money

parfait

belli e precisi, un po sensibili ma si sa, l'lelettronica da appassionati non espertissimi è tosta!.

Using with an Arduino Uno connected right up worked without issue I’ve had it connected for sometime and have had no problems, runs several hours at a time.

LLego en buenas condiciones y cumple con lo especificado.