Orzly Screen Protector for Switch

So glad I got these! I take my Switch with me everywhere, but the screen of the device being open like this makes it quite vulnerable (as does sliding it in and out of the dock). I don't normally like screen protectors, but the glass ones are actually really good, as they physically stop the screen from getting smashed in, so this is exactly what this device needed! Fortunately I had bought some of these tempered glass types from these people before for my phone a coupe of years back, so I'm glad that they actually make them for the Switch! I've tried a few by various different people in the past, some were good, some not so good. But the Orzly ones always go on really easily, and I like the fact that with theirs you can't even tell that it even has a screen protector on. It actually looks like the device's natural screen rather than being an obvious eyesore that some of them can be. They've also made putting them on really simple. You simply wipe the screen first with the special alcohol wipe that comes with it (which stops any dust from getting trapped under it before it sticks). Then you line up the glass protector held in place by a sticky tab, so that it's perfectly aligned before peeling off the self adhesive back. Then once it's perfectly in place, you just peel that back off and rest it down on the screen of your Switch, and the self adhesive does its magic instantly. (you literally can watch it working itself out from center to edge in a matter of seconds, which looks kinda cool). It's sort of a darker color before it sticks, and goes an instant full transparent that looks just like the natural screen the moment it's stuck down. The fact that these glass types are perfectly flat, they're much less prone to bubbles than the regular kind of screen protectors, so most of it sticks by itself almost completely on first touch except for around the edges. So then you just take the squeegee that came in the pack and simply swipe it from center to edge, and all bits stick down perfectly, leaving you with the whole thing looking exactly as the Nintendo Switch looked before you put the screen protector on. The screen sensitivity is as perfect afterwards as beforehand, and you can take them off afterwards without leaving any marks if you ever need to replace them. I'm glad they give you two of these in the pack just in case you make a mistake, but it went on perfect first time, so fortunately I was able to use the second one for the other switch that I bought for my daughter, and that went on perfectly too. So I'm very very pleased with this. and I'm now alot happier about bring it with me knowing that my screen won't get damaged. While I bought a travel case for it anyway for bringing it out and about, I'd still say these toughened glass types of screen protectors are worth using aswell, as putting it in and out of the dock each day means that it's prone to getting scraped when doing that if the screen happens to knock against the inner walls of the switch dock, so these proved to be by far the safest way of making sure my Switch stays intact.

I'd been looking for a good screen protector but most of the recommendations on various online forums were for US-based suppliers. I came across some UK-based recommendations for Orzly and thought I'd take a punt. Judging from some of the other reviews, the supplier had issues with keeping up with demand for the product and therefore some buyers received their goods late. I was lucky and didn't have such problems - item came within the specified time frame, but your mileage may vary. The inclusion of alcohol wipe and cloth was a nice touch as it meant the screen could be prepped for the protectors. I don't recall seeing any dust stickers in my box and therefore didn't use them. I found that the alcohol wipe and cloth were more than sufficient to remove all the dirt and dust that was on my screen so it wouldn't do any harm to avoid those. Installation was quick and easy - I aligned the protector to the bottom vents / gaps on the switch and then just let it "flop" down to the top of the screen, pushing any air bubbles in an up and out direction. After installing, there were no additional bubbles other than on the right outer edges of the screen, which disappeared as soon as I gave them a rub (again, in an outward direction from the centre of the screen). I'm not sure how easy removal will be but I'm not too concerned about that at this point. The protector does leave the screen shinier than the original plastic screen, but I'm happy to live with this if it means that my kit is well protected! Touch screen ability doesn't appear to have been compromised and cleaning the protector is a breeze. For under £9 (at the time of writing), it can't be beat. Off the back of my positive experience, I purchased the Orzly protective case. Would happily recommend this product to anyone looking to buy a good screen protector for their Nintendo Switch.

10/10 protector, managed to apply perfectly on the first try. No need to remove any dust from underneath. Blends in perfectly and protects the Switch from the silly dock issue. Yes, I took some precautions before applying and you need them if you want the perfect fit but that's just the way physics and nature works. So go take your Switch and the protector to the bathroom, take a warm shower so dust particles aren't flying everywhere (moisture wins with dust) and just follow one of the guides on Orzly youtube channel to apply (use the dust stickers to hold the glass in place instead of using them on the screen) to install it. Managed to get it perfectly aligned and without any bubbles/dust underneath the glass on my first try. As a bonus it comes in pairs so you'll have a spare piece of glass just in case

Ürünün Nintendo ya uygulanmasi kolay ve ürün oldukça kaliteli

Come al solito acquisto arrivato in perfetto orario secondo tabella di marcia, ma bando alle ciance, è la prima volta che acquisto una pellicola per questo tipo di dispositivo e da assoluto ignorante leggo un po’ di recensioni e feedback degli utenti. Ero orientato ad acquistare la pellicola della JETech visto la precedente esperienza MOLTO positiva con iPad Pro e visto che, anche seppur minima, la differenza di prezzo rispetto a quest’ultima ho deciso in estremis di acquistare e di affidarmi a ORZLY. Con grande piacere mi si presenta un ottimo prodotto dal facile utilizzo, dalla facile applicazione e dall’ottima fattura. Vetro temperato cristallino, senza sbavature ne tanto meno ritagli strani. Copre perfettamente tutta la superfice del dispositivo e anche in controluce non crea riflessi di alcun tipo. La pellicola viene fornita con un panno imbevuto di alcol per la pulizia, un togli polvere un togli bolle e una straccetta di velluto per il tocco finale. Ah, nota importante le pellicole SONO DUE! Bravi e complimenti.

This, as the headline says, is a must have. The Protector is indeed glass (dont let others claims fool you), and does not scratch form my keys or from my knife (the steal of the knife is vg 10, about a 5 on the mohs hardness scale). It is very thin, which is a good thing however as its not noticeable on the screen at all. the switches screen is plastic, its not going to break when you drop it, just scratch. the protector is to prevent scratches not breaks. it also fits into the dock with no issues. The box comes with 2 screen protectors, 2 alcohol wipe packs, 2 dust remover stickers (for after you clean the screen and need to remove lint/dust), a microfiber cloth, and a plastic tool for pushing air and bubbles out (however installed properly bubbles wont be any issue. I highly recommend that if you have a switch, or are going to be getting one, get this screen protector before you even take it out of the box. plastic screens are as easy as butter to scratch, so any protector is a must have. given the low price of this one, for the quality of product you get, its a stellar deal, and a must have. To install the screen id recommend you start by fully removing the fully removing the plastic back covering the adhesive once you have totally cleaned the screen. then holding only the side and top edges of the screen protector, line it up with the bottom cut outs at about a 45 degree angle to the screen. once lined up lower the screen, adjusting as you go to keep it perfectly lined up. once set on the screen, using the tool or your fingernails, push the remaining air up to the top (like an ocean tide, moving onto a beach). As the instructions do say, let it sit for about a day. or at least a few hours to let it fully set on the screen. I have installed hundreds of screen protectors (used to work electronics retail), and this is basically the best way to install this protector onto the switch.

Een goede screenprotector voor de switch van Orzly. Is op tijd binnen gekomen en komt met 2 screenprotectors, vochtig doekje, stof doekje en stickers. Ik heb voor het eerst zelf een screenprotector geplaatst en het ging de 1e keer al super goed! Geen stofje en geen bubbel te bekenen. Wel met behulp van de Orzly video op youtube 😊 Zelf bewaar ik de tweede screenprotector voor later en heb ik niet uitgeprobeerd of er geen schade komt met scherpe objecten, maar daar kom ik misschien ooit in de toekomst wel achter.