J-B Weld PlasticBonder Tan

Excellent Product When Used Properly for Actual Structural Repairs This has been an excellent product for proper automotive and shop-related repairs when used the way it is actually intended to be used. We keep products like this on hand regularly around our automotive and business operations, and this has consistently performed very well for bonding certain plastics, trim pieces, and repair areas that require real structural adhesion rather than temporary shortcuts. One thing worth mentioning is that products like this work best when surface preparation, curing time, and proper application are taken seriously. This is not one of those products that should be blamed because someone tried to improperly patch, force, or improvise a repair beyond what the product was realistically designed to handle. The syringe design makes application clean and controlled, the mixing process is straightforward, and the bond strength has been impressive when used correctly on appropriate materials. It also sets up relatively quickly compared to some other structural adhesives we’ve worked with. The packaging arrived sealed properly with no leaking or hardened product inside the syringe, which is important with adhesives like this. The quantity also feels reasonable considering how little product is often needed per repair. Overall, this is one of those practical shop products that performs exactly the way professionals expect it to when used properly and with realistic expectations. #AmazonFinds #JBWeld #AutomotiveRepair #CarParts #GarageEssentials #StructuralAdhesive #AutoRepair #ShopTools #VehicleRepair #PracticalLiving #Automotive #LuxeLife

✅ This stuff creates a bond that is stronger than the material being joined. ✅ Unlike various crazy glues, it is positionable for a few minutes after the pieces are joined. ✅ There's no smell, good, bad, or otherwise. ✅ It mixes easily. See Pro Tips, below. ✅ It works particularly well for sticking printed items made from PETG or PLA together. I wish this stuff came in other colors, for example, white or clear. (Is clear a color?) However, the tan doesn't stand out, and it can create a nice, unobtrusive bead with careful application. 📌 Pro Tips... I learned this from Bob's wife, maker of BSI Quick Cure Epoxy . Use the plastic top of a Maxwell House coffee can as a mixing surface and mix with Royalco 5723 goo spreaders. For some reason, NOTHING, including this J-B weld or their amazing epoxy will stick to either of those. I've been reusing the same lid and goo stick for nearly a decade.

I cannot say enough good things about the J-B Weld 50133 Plastic Bonder! I needed to repair a cracked ABS plastic panel on my car and a broken PVC trim piece around my house, and this adhesive exceeded every expectation. The syringe design makes mixing the two-part epoxy so easy—no messy measuring, just squeeze and go. It set in under 6 minutes like the label says, and after letting it cure for an hour, the bond was unbreakable. I tried prying the repaired pieces apart and they wouldn’t budge at all! What I love most is how versatile it is. It worked perfectly on flexible and rigid plastic, and even filled small gaps seamlessly without any extra filler. The tan color also blended in nicely with my project materials, so the repair isn’t an eyesore. At under $7 for a 25ml pack, it’s an incredible value too. I’ve gone through cheap plastic glues that fail after a week, but this J-B Weld bonder is built to last. Whether you’re a DIY hobbyist or tackling household repairs, this is a must-have in your toolbox. 5 stars all the way—will definitely buy again!

I tested this glue and several others on polypropylene. I used the lid of a disposable coffee cup, which had "5" in the recycle symbol indicating polypropylene (pp). I did not sand the surface to rough it up. I used a drop of each glue to attach a metal nut (as in bolt/nut) to the flat plastic surface and allowed 16 hours to cure. * JB Weld Plastic Bonder (this item). Peeled right off, adhered moderately to metal nut. * Testors model cement. Peeled right off, did not adhere to metal nut. * Gorilla Glue. Peeled right off, adhered moderately to metal nut. * Bob Smith Industries slow cure Epoxy. Peeled right off, adhered well to metal nut. * Contact cement. Adhered moderately to polypropylene and to metal nut. Adhesion depends on size of surface area. * Super glue. Peeled right off, adhered well to metal nut. * Construction adhesive (Fuze-It). Peeled off of polypropylene easily. Adhered moderately to metal nut. * Hot glue. Adhered moderately to polypropylene and to metal nut. * High temperature hot glue (Steinel GF 260). Adhered well to polypropylene and to metal nut. * 2-part superglue and accelerant (Loctite Plastics Bonding System). Adhered well to polypropylene but only moderately to metal nut, fairly easy to separate, probably requires larger surface area contact. Only contact cement and hot glue produced a good bond of metal to polypropylene. Contact cement is only as strong as the latex itself so I was able to stretch the nut away from the polypropylene with a little force. Hot glue gave a stronger bond, though with more force I was able to break them apart. High temperature/high performance hot glue stick formulation held well and required significant force to break apart. This also has the benefit of filling gaps if that is a requirement. This seems to be the best option, though I don't know about longevity of the bond. Untested were polypropylene formulations of hot glue (SuperTac 500 or Tecbond 263) because of cost and availability.

The **J‑B Weld Plastic Bonder Structural Adhesive Syringe turned out to be one of those “why didn’t I buy this sooner?” products. First thing I liked is the dual-syringe design, which dispenses the two components in a simple 1:1 mix ratio, making it easy even if you’re not a DIY expert. Just squeeze, mix, and apply—no complicated measuring required. I used it to repair a cracked plastic piece, and it worked surprisingly well. The adhesive sets in about 15 minutes and can be sanded after around 30 minutes, so you’re not waiting forever for it to cure. What really impressed me is how strong it becomes once cured. With a tensile strength of about 3770 PSI, it forms a tough, permanent bond that can handle plastics, composites, metal, and even concrete

Easy to use and has stood up to more than 3 months of use! I was worried that this would not plastic to plastic bond as well as I needed. But so far it held up to 3 months of use through winter. Next test will be the heat of Utah summer! The color isn’t my favorite, but it definitely has the holding strength I’ve needed. It’s super easy to use and mix, and the cap has done its job to keep the unused portion useable for future projects. The drying time was just fine, seemed to work quickly enough to not have to worry about keeping it steady for days, but it had enough workability time to allow me to get my project in the correct position before it set.

This is a great product. Repaired the plastic leg of grill and a shelf on a grill cart. Both hard plastics. Highly recommend.

Excellent cohesion to a variety of plastic parts/hoses etc. A rat had eaten a hole in my f-150 hoses. One of the small hoses served the wiper fluid reservoir. Bought some small diameter hose and cut it down the center. Then placed the hose over the glued hose that had the hole. UPDATE: I saved almost a $600.00 repair with this J-B weld. The turn/wiper plastic like component on my 2012 F-150 was broken at the female screw holes (yes I said it). The turn signal/wiper part is almost $400.00 and involved removing the airbag so I tried J-B Weld. I followed instructions and the turn/wiper works perfectly. Important: I had to hold the part in place for about 10 minutes. Then DO NOT use until next day to allow complete drying. $7.00 for $600.00 is an excellent investment. FYI: I tried the plastic welding solution that failed.

Very strong glue that sticks to almost anything

Très satisfaite de ce produit car avec le système de fermeture ne sèche pas et dure

El mejor con diferencia

Excelente producto para reparacion adhesivo epoxico para material ABS en tapa de caja o batea de camoneta ford lobo (sugerencia preparar la superfiecie limpiandola libre de polvo y gras residuos y raspar con carda de alabre para relizar una rugosidad a ambos materiales tanto el ABS de la tapa como el metal que es el sujetador )

Amazing product as it perfectly worked for my car bumper misplacement. As expected Aramex delivery service is pathetic in my area and customer service doesn't bother to respond to my calls