Pull-Out Spray Wand Fits Grohe Pull Out Faucets, Compatible with Grohe Part 46312IE0/46298IE0, Chrome, Easy Install with O-Rings, Saves 70% vs OEM

Grohe faucets are high quality. They work for decades. The two in my kitchen are now 20 years old. The spray head doesn’t last that long. Original lasted about 12 years before the spray head would not switch to spray. OEM replacement cost around a hundred. Lasted 8 years. Same problem: The button to spray stopped working. Got this. In manufacturing's quality it is far lower quality than Grohe; weighs far less than original. . But it works, at a third of the oem version cost from years ago. Installment involves screwing old one off an old one on. There is a an O ring - a new one was provided. I kept the old one. Saved the new O ring for later. If it last for a few years, I am good. And the spray button on this one stays on!! If you have the old version, you know! This is our spray for plates going to dish washer. Like that. I bought another for later use. Grohe faucets last longer than I do, but I have a cheap replacement sprayer to attach. I have another kitchen sink that may need it. Good price.

Much better price than the genuine Grohe replacement faucet. Works great and actually might be better than the original Grohe faucet. How? I like that when you switch from the single stream to the power stream, and then turn off the faucet and then turn it back on, it doesn't automatically go back to the single stream. You have to switch it back from the power stream to the single stream. Maybe some like the automatic feature of the original faucet, but we're all buying this faucet because the original faucet from Grohe eventually went bad, and it's possible that it went bad because of that design feature. I'm not sure of my theory, but what I am sure of, is this replacement faucet is cheaper than the original Grohe faucet, and it's cheaper than buying and installing a brand new faucet. And this comes with some new o-rings. It also fits like a glove over the original faucet end.

As others have noted, the tube that slides onto the existing hose fitting is a little larger than the tube on the original wand head. That's why it comes with a new O-ring and a flexible washer. Pay attention: It is noted on the box that if it leaks from this connection, you should install those, and it shows you how. I found the flexible washer fixed the leak, so I saved the new O-ring for possible future use. Aside from that, it works well. For how long, I don't know...

Update 11/2/2023: After a few months it Stopped Working! Very Disappointed! ____________________ I just received the part. It was pretty easy to change out and I’m a senior woman with arthritic hands. There weren’t instructions so I looked on YouTube. Not much guidance. It does hand screw off and hand screw back on. Couldn’t find video that says where to place the o rings. It did not look like there were any old rings. (I guess they completely wore out.) So I 1st seated the larger ring on the end cap of the hose and next seated the smaller ring at the same end. Then I placed the new sprayer head against the end cap of the hose. Slid up the piece that screws it all back together. It did not leak....so far. I did remove the reducer as I live where the city water is especially hard. (I believe the reducer would be clogged in no time based on my hard water.) This replacement sprayer head works better than the original Grohe sprayer head. Only time will tell. I wish I replaced it sooner:-)

The product came with a perfectly good O-ring and a (removable) flow restrictor. I left the flow restrictor in place. The comments which said you have to buy an O-ring are incorrect. I wasted nine bucks on O-rings which I don't need. (Too much trouble to return them.) As recommended by other commenters, I coated the new O-ring with plumber's grease. The new faucet head installed very easily, just using a pair of pliers to grasp the metal cuff which is part of the hose; unscrew the old faucet head and screw on the new one. The new faucet is working perfectly after installation. Water pressure is fine; aerator and spray are working perfectly. No leaks. If I run into any problems later on, I'll update the review.

Update 4/27/2023: In less than 12 hours Awelife had a new replacement spray wand and o-rings delivered to my door! That is AWESOME service. Be sure to replace the existing o-ring on the hose with the properly sized new one provided by Awelife. See my photos for the broken wand and the new replacement I received. UPDATE 4/26/23: The spay wand continued to leak periodically. Today I retightened the wand to the hose. The wand broke apart. I always hand tightened the wand, never used tools. I am always careful about over tightening. Take care tightening. Got just over 8 months of use. Contacted the seller today... We'll see. The original spray wands of this model usually fail because of a very inexpensive degraded proprietary washer inside the unit. I took 2 of these wands apart and each time it was the same failed washer. I called Grohe and asked to buy a replacement washer. They said they don't sell them. I would have to purchase a VERY EXPENSIVE replacement wand. I asked about the lifetime warranty. They said I would need to produce the original invoice with my name on it. I bought it over 20 years ago! I didn't know where the invoice was. I lived with the malfunction for a long time. Then I found this replacement! It works and looks great! I would have to buy 10 of these replacement wants to equal the cost of one OEM replacement. As far as leaking. Mine also had a slight leak where the hose connects to the wand when I pulled the wand out. I suggest making sure the O-rings are correctly seated and tightening the wand firmly into the hose. That worked for me.

We have had our Grohe faucet for about 15 years and have loved it however about 6-7 years ago the spray wand failed which was okay but recently we were getting a mixture of spray and regular flow which was annoying to say the least. When I saw the price of the manufacturer’s replacement, I was shocked. I took the plunge and ordered this replacement after reading the reviews. IT IS GREAT! May be a little lighter in weight but otherwise nearly identical. Easy to exchange with the original. Took less than 15 minutes. Works like a charm. Not sure why we waited so long. There had been some discussion about it not fitting on the faucet’s neck but with a little push, it fits well. Would definitely recommend this product which cost a third of the manufacturer’s replacement

What a great deal this was against the manufacturer's high-ticket item. Went on great and works mostly well. Although when it's set to the shower mode it has sort of a vibrating or pulsating rhythm. Also it will surge at a higher setting at times. So I just use the other setting. No problem.

Products is not original it’s local quality

Die Handbrause von unserer Grohe Spültischarmatur war kaputt, da das übrige Teil noch vollkommen in Ordnung war haben wir uns für diese Brause entschieden. Es war nicht ganz leicht, die erste von einem anderen Hersteller passte leider nicht, so haben wir diese gewählt. Sie passt zu Grohe, funktioniert einwandfrei. Habe mich sogar dazu entschlossen noch eine zu kaufen, denn wenn man schnell ein Ersatzteil benötigt, ist diese parat. Also alles Bestens, vielen Dank auch für die schnelle Lieferung!!!

Ricambio compatibile con i modelli Grohe Ladylux, si installa in pochi secondi senza attrezzi. Modalità spray con doppia funzione di spruzzo e limitatore di flusso rimovibile. Buon rapporto qualità-prezzo rispetto all’originale Materiale migliorabile, speriamo tenga nel tempo.

Excelente calidad y precio

Me semble pas trop solide !!! Lorsqu'on arrête le robinet il s'écoule encore quelques gouttes et la séparation des jets n'est pas nette. appréciation : 6.5/10.