Printer Cleaning Fluid 17oz

Best head cleaner I have used for DTF. I fill the cap and microwave it for 15 seconds or until the solution bubbles and then poor it into the capping station let the heads soak for 20 minutes. It works great.

This stuff really works. I have a Cannon MG6200 and the jets got clogged from not printing for a long time. I took out the head and cleaned it with the Hospital liquid as instructed and now I have a like new Cannon.

I have a Canon Pro-100 inkjet printer that I did not use for about a year. After head cleaning with the Canon printer maintenance software 2 print heads refused to open up. Looked online and fount this as the top rated product. I filled a small tub with about 1/2-1/2 inch of the product and left it to sit over night. Liquid became ink filled so I did it again. Again ink filled color. Emptied it again and filled the tub the same with distilled water and left it sit, did this twice. Last tub with product in it again. Left it in the sun for about one hour and put it in the printer with new ink. Ran a print head check and they work. Some on asked what are the ingredients? Well it's not listed but smells strongly of ammonia. Bottom line is it worked 100% and after I ordered this I shopped new print heads $500. The I looked up new printers. You can't really get new printers. Most are discontinued. So if this didn't work I was in a jam. Word to the wise use your ink jet printer at lease once a month. "Alexa remind me to use the printer".

I used this to clean my Canon Pro 10 printhead. now it returns back and starts working. I only give 4 stars because of no instruction on how to use it. I actually used the whole bottle of solution. The first several tries using small amount of solution did not work.

very good product, works well

after buying i learned the ink is water soluble. product works but seems to be nothing more the lightly soaping water. I found using water works just as well.

Me sirvió para limpiar la impresora y fue de mucha ayuda.

Received an anajet DTG printer that had been improperly put away for years. The white print head was 100% blocked. Flushed the printhead with the solution and allowed it to sit overnight. Completely clears the clogged jets. Solution seems very mild, has an ammonia smell but works extremely well.

Used to clean heads on Epson XP 960 printer. Worked well after multiple applications.

Some years ago I bought a printhead cleaning kit from Printhead Hospital. It did the job admirably. I had a recent printer issue, but had run out of fluid. Naturally, I purchased from Printhead Hospital. The fluid arrived quickly and did the job of cleaning off a lot of ink very well indeed.

J'avais vidé un kit de nettoyage pour mon imprimante Canon Pixma MG7150; je l'ai rempli avec ce liquide de nettoyage et ai fait une demi-douzaine de cycles de nettoyage de l'imprimante; résultat: les lettres noires bavent deux lignes sur trois. Du coup j'ai sorti la tête de l'impression de l'imprimante: il y avait de l'encre stagnante à la sortie des têtes, je l'ai mise à tremper dans l'eau avec quelques gouttes de ce liquide sur les éponges de réception des cartouches. Après vérification de la propreté de la tête, remontage et impression d'une soixantaine de feuilles ,le problème persiste: cela bave. Du coup j'ai redémonté, dévissé l'intérieur de la tête pour voir: pas de fuite visible. Est-ce qu'il y avait un résidu de liquide et que ce liquide est mouillant? Est-ce que le liquide a bouffé les têtes? Mystère. Moralité: avec un bon tutoriel sur youtube le démontage de la tête d'impression est facile et souhaitable: rien de mieux que regarder de près. Le nettoyage à l'eau est inoffensif et a des chances d'être suffisant. Question: quel est ce liquide vendu 20€ le demi-litre? Du white spirit, de l'acétone? Mystère. Bonne chance.

This is my secont container. It cleans the printheads very effectively.

It does what it says on the tin.