BCH Standard Refill Ink Kit for All Printers - 100 ml x6 (Total 600 ml)

Everything you need to refill cartridges. Would absolutely buy again.

Great product, saves money and good results. Just need to learn the refilling process

Bought this refill kit for my Canon inkjet printers back in August for $40. This kit could refill each tank about 10 times. The ink quality is on par with the Canon refill cartridges. I have not used it on photo paper so can't comment. For everyday printing, this is excellent value. Just make sure you wear gloves as it can get messy and easily stain your skin, and other surfaces. Ink cartridges come with a caddy that covers the bottom opening where the ink comes out. Make sure you put the empty ink cartridge into it as it will keep the ink from coming out as you fill it from the top. Once you have covered the drilled hole, only then take it out of the caddy and place it into your inkjet. Always make sure the hole is covered with tape tightly otherwise ink will drip out of the bottom and printer head. Will definitely buy again.

When it comes to the shipping, I ended up having to leave a one star rating. Simply put; I purchased this and paid for one day shipping. I didn't get a tracking number until almost 48 hours later when it was finally shipped, and it arrived about a week later. This product shipped from a city only about 3 hours away from me on the same interstate. Amazon was fast to refund my shipping fees, and at one point, the entire invoice because the tracking number stopped working and it was assumed the order was lost. Not very good, so take my advice; don't bother with the one day shipping. However, the product itself is beyond 5 stars. I was able to use this ink refill kit to give new life to my old HP printer. It uses the number 61 ink cartridges that are about $14 on average and last about a month printing about 10 pages of documents each day or a couple of pictures each day. These cartridges hold a LOT less ink than most printers, but they are a bit more durable. The cartridge I used had been sitting dry for about 4 years. That's a long time. I cleaned the heads (soaked in witch hazel, not 90% alcohol like most recommend, for 2 hours). I filled the cartridges quite easily (take the label off the top and look in the holes to see what color goes where). The blue and red can hold about 1 mL without dripping or streaking, and the yellow seems to hold a bit less. Gently twist the needle to get down into the sponge before refilling; don't just push it down because that will just compress the sponge and give the ink no where to go. If you get the message that you're using a non-authentic or third-party ink cartridge (different printer will display a different message), that's a good thing. Just press okay or print anyway. It will stop trying to track the ink levels, which means the chip in the cartridge won't work to make the printer think that the cartridge is empty or expired. Just keep up with your prints; if they look lighter than normal, just refill. I have printed out quite a few brochures and other things for work in the last few days, perhaps thousands of full color brochures and pictures, so I've had to refill 4 times so far. That was between 3.5 and 4 mL of each color so far. It has barely made a dent in the levels left in the bottles, so I can see this lasting for quite some time. In fact, I'm going to purchase a few more of these just to have them. I see one of these kits lasting at least an entire year printing out about 100 full color brochures (front and back) each day. Note: with the number 61 and similar ink cartridges, be sure everything is completely dry before printing. If you have to clean the heads, even a small drop of liquid on the circuit tape will cause the printer to not print properly or not at all. If you notice a pool of ink of the bottom of the cartridge on the head where the ink comes out, you have overfilled it. Take the syringe and remove some of the ink until it stops leaking out of the bottom, then dry it completely. Lightly blow some air near the slits next to the head to remove any remaining ink stuck there as liquid there will also cause the cartridge to misfire. Also with these cartridges, there is no drilling involved. Just take the tape off of the top and use a light to see what color goes where. There are 5 holes total, 2 for red, 2 for blue, and 1 for yellow. This is because the XL version of each cartridge is the same, but differs only in the amount of ink it initially comes with (which isn't very much). You will be able to refill it to about 4 times more ink than what the XL version comes with stock, but again, be sure to not overfill it. All of the liquid should be contained in the sponge.

ماهو نفس المنتج المعروض لا شكلاً ولا صنعاً علماً بانه مكتوب صناعه امريكيه واللي جاني صناعه كوريه جاني المنتج مغلف تغليف عادي الحبر فقط بدون الملحقات👎🏻