VIVO Adapter VESA Mount Quick Release Bracket Kit, Stand Attachment and Wall Mount Removable VESA Plate for Easy LCD Monitor and TV Screen Mounting, Stand-VAD2

This mount can be VERY useful to solve unique mounting issues...with some caveats as others have noted.... The GOOD to GREAT: Used this mount to fix an HP branded 27" monitor to a Dell-specific 27" stand. As you look at OEM-specific stands, they are generally similar, with the difference being mounting bolt patterns and spacing on the monitor mounting heads...not VESA, but kind-of similar. Typically these are flat metal plates with a variety of holes, tabs, and slots that line up with the specific quick-release mounting plate pattern on the back of their own screens. * I had an extra Dell 27" stand, and using a standard VESA plate as a pattern, I found 2 top holes that lined up with the top 2 holes of a 75mm VESA mount. (Yes you do need to remove the trim plate(s) and remove the center screws that hold the plate to the mounting base top/tilt plate.) I marked 2 additional spots from the 75mm spacing, and and then drilled out, now having 4 holes that matched VESA mount spacing, at 75mm. * Different vendor OEM plates may require some fudging with 75mm and/or 100mm spacing until you can find or create holes that allow fixing of the Vivo VESA mounting adapter "back" plate. * I took off the square plastic Dell trim from the top of the stand, but was able to leave the small circular trim that covers the top tilt plate and spring tension mechanism. * Before reassembling, I sprayed the back of the top plate with some leftover paint, so that it wasn't bare metal...not necessary, but a nicer look. The MEH to MAD: As others have noted there are some manufacturing or quality type issues. Mine was opposite of other reviewers, in that the mounting and VESA adpater plates were so tight I had to use a hammer to initially separate. I tried to bend the grooves and plate around to loosen the fit, but does not easily or reliably release to allow removing the monitor. Once I fully mounted, it essentially froze tight again. It's not the biggest issue, and better than being loose and wobbly, but I would like the option to remove the screen from the stand as intended. Not a deal breaker. But a little discouraging, and reason for 4-star review. This mount is soooo close, but does enough to make it a really useful option for some unusual mounting situations. It's definitely worth trying to see if it works for your needs. ******************************************************************************* UPDATE 5/29/25: Despite the issues with the first mount, I purchased 2 additional, for a total of 3. Neither of the newer ones had the binding problem, and appear to cleanly release. I'm upgrading my review to 5 stars. Have now adapted a 2nd Dell stand (24") that required re-drilling all 4 holes for proper alignment/attachment. And, also an older Samsung stand (early 2000s 20.4" 204B)...all 4 holes in the metal bracket aligned with the 100mm holes, and just had to drill out the plastic trim behind the metal mount. VERY useful mounting bracket. Definitely try if you need to mount unlike monitors without buying a new VESA stand.

Works great. Sturdy. Easy to use. Purpose: easy attaching/removal of my gaming monitor to a custom vesa floor stand for non permanent usage on couch when main TV is otherwise occupied. Yes, my monitor had a recessed area. No, I did not use the included hardware on the monitor side of things. It does need extenders that work to counter the recess. Plan to probably buy your own monitor spacers if you have a recessed vesa panel. I had some spacers laying around. Otherwise, this fit the bill perfectly. Monitor comes off for storage and floor stand folds up for storage as well.

Came exactly as described and does exactly what it says it will do. Practically a god send when mounting a large-ish monitor by yourself, or for getting some extra life out of a existing 100x100mm VESA monitor arm, or for applications where the monitor has to be taken down lots. Some people appear to have gotten bum ones but the one I got was basically perfect out of the box with well done cuts, holes, and bends that make for a tight fitment. Included lots of screws, spacers, and washers for different monitors. Worked fine for my Philips 7600 43" 4K 144Hz TV with 200x200mm VESA holes that I'm using as a monitor on a older, but still serviceable, monitor arm with 100x100mm VESA holes. The directions were solid too. One thing to watch out for is that the screws and metal plate are all either made of soft alloy or mild steel at best. So don't put too much stress on them. The good news there is that TV's and monitors from 2020 on wards tend to be very light so this shouldn't be a issue. My 43" TV hardly weighs more than the 32" monitor that it is replacing for instance. Which is around 15lbs. The ~10yr old monitor arm its going on to was built to take around 25lbs if I remember correctly and still seems sturdy enough to do the job! Other thoughts: Be careful tightening the bolts. The adapter plate that goes on the monitor arm is about 1.5-2mm thick and the threading is easy to strip if you decide to really start cranking away on it or use a power driver. The 4 bolts the VESA standard uses, even when screwed in light-ish, will do the job just fine for newer TV's. Something else to watch out for is the adapter will stick out about .75" from the original mounting distance which cause a small but significant cantilever effect that will cause the monitor to droop. I had to tighten my monitor arm up/down pivot point there to stop that from happening. Once I did it was all good. The spring latch feels pretty secure and my monitor will rotate without issue if need be. The black powder coating isn't all the durable but in this application, which is a home office, its fine and I expect will be good for many years there. If you need something that can take abuse, could be used outdoors, or support monitors significantly heavier than 25lbs I wouldn't bother with this. Its just not built for that stuff.

Works really well, but the screws didn’t fit my screen so I had to go to Home Depot at get M4x6mm screws instead of the 12mm screws. Other than that, no issues.

I don't know what I did without this slick device. Like another recent reviewer, I use this to quickly hang and unhang a monitor for DJ/Karoke gigs. The receiver plate is secured to a standard VESA mount with four screws, and the quick-mount adapter attached to my monitor with another four screws. The monitor + adapter slides down into a V-shaped channel and clicks and locks into place with a spring clip. Simply push the clip lever to unlock and slide the monitor up to remove. I purchased a 2nd kit so I can quickly swap the monitor for an ipad holder if needed. Well worth the price for speed, ease and coolness.

I have used this quick release mount on at least a half dozen different monitors and TVs (up to 32 inches), and their mounting brackets. This mount does what I expect it to do, it allows me to quickly move a screen from one mounting location to another with easy. If I could change anything I would ask that it be even more sturdy than it already is. I'd love to see the slots and mating tabs moved as far as possible to the outer edges of the brackets. As it is right now, the screens feel a BIT wobbly when moved and give the impression that the monitor can be rotated when, indeed, it can not. This is a good design but I think it could be made even better. Don't get me wrong, these do work very well and I will buy more if needed. The brackets fit well together, for most part, and even my 32 inch monitors feel as though they are secured solidly to the mounts I have them on. I've looked at other quick change mounts (there are a lot available) and this one seems to be the best so far. I certainly recommend these to anyone who is interested in a VESA quick change mount.

I have two pen displays (rather heavy) and I was hoping this would work! I like it so much I just ordered a second set. I was hoping somebody out there had thought of a simple way to snap in and out display monitors on a Vivo stand. And you guys DID.

Most of this product seems great, but the holes are NOT VESA-compliant. This product should be taken off the market until they redesign it correctly. On the stand side, the hole spacing is wrong. The VESA standard specifies 75mm or 100mm center to center. These holes are drilled at 97 mm center to center. There is no way to attach this to any monitor stand or arm that is VESA-compliant without drilling new holes! Also, the holes appear to have been drilled to be threaded for 4mm machine screws or perhaps #6-32, but are not actually tapped (threaded). So the screws don’t screw in even without attaching it to the stand! The monitor holes are even worse, if that’s possible. Instead of being 4mm holes, they used 6mm holes. Although the spacing is correct (and would still work even if they had missed the mark by 3mm at that size), it results in the monitor not being held securely, because the screws aren’t nearly as wide as the holes. There is quite literally no way to use this product as shipped, and I have serious questions about whether this could plausibly be a one-off manufacturing mistake, given the nature of the error. My guess is that they made a bad batch and worked around it by drilling oversized holes, but failed to work around it on one part, so *maybe* some of the positive reviews got a unit that had the workaround correctly applied, but what I’m seeing here is literal junk that should never have been sold to consumers, and should have been melted down for scrap. There’s no excuse for selling a VESA quick-release adapter that doesn’t conform to the VESA spec.

This is just perfect. If you have a portable monitor and want to mount it to a VESA mount but may want to pull it off once in a while? This is what you are looking for. Super easy to pull on and off, super sturdy feeling mechanism.

Works great or monitor arm setup(another quick release monitor didn't include nuts and washers), heard a nice click when putting it on, seems stable. Will update review to 5 stars if my monitor doesn't fall off it within a couple months

I have used this for 2 years now. Never a problem. Used in my RV for my 32inch tv. Makes is very easy to detach and store for travelling.

Excelente adaptador para poder quitar-poner cualquier dispositivo por medio de adaptador VESA. Lo uso con una tableta grafica Huion Kamvas 24 Pro 4K y es sencillo para ponerla y desmontarla a una base

Really great VESA adaptor, i had my Hibrid TV Monitor for a lot of years with that original stand that I was so bored of. This adaptor really came in handy with my dual monitor arms!