TRUE MODS 7 Inch Halo LED Headlight 4.5" Passing Light for Harley Davidson | Chrome Mounting Bracket, DRL, H4 Plug n Play, Fits Daymaker Road King Street Glide Electra Glide Ultra Classic Motorcycle

I have a 2009 Street Glide with auxiliary lamps. Unboxing/install: initial product quality is very impressive, product feels solid and well made. It is packaged very well, zero damage in transit. Instructions are not great, but will suffice to get the product installed. On my bike, the headlight wiring is a direct fit, plug and play. With the provided mounting bracket, it's as simple as unscrewing and then screwing everything back in. The auxiliary lamps are a little more involved, they are not plug and play (not surprised because on my bike these lamps weren't stock). I had to cut the harnesses and re-wire. Install was overall pretty straightforward but took at least a couple hours and involved a little bit of DIYing. Finished product is great for the price. The lights are very bright, and the halo in the headlight is very slick (I wasn't a fan of the halos on the aux lamps, luckily they are an extra wire so it's very simple to just not have them on). The beam is very scattered, it's definitely not a high end light. But, it lights up where you're going WAY better than the OEM lights, and I don't think it blinds oncoming drivers. All in all, I like it. It's definitely not as good as name brand aftermarket LED headlights, but it's also significantly less expensive.

Great upgrade of my HD Road King CVO lights

Reasonably simple installation, looks nice and is so much brighter than the OEM. Definitely worth it!

I installed these on my 1991 Electra Glide. Overall quality is impressive for the price. They seem solid and well-made. They are very bright and I really like how the passing lights have the daytime running and turn signal wiring. They are not an exact drop in replacement. For the passing lights there was not enough room in the housing for the plug. Had to cut it off and use other connectors. Also there was not enough room in the housing to run the DRL options to the turn signal bulb below. I had to drill a hole in the back of the housing and run the wires out to connect behind the fairing. It all looks fine but may be daunting to some installers. Also, the bulbs are bulky so that my trim ring with a Harley visor wouldn't fit so I ditched the visors. The headlight adjuster isn't long enough to sufficiently adjust the bulb down. I needed to add a spacer behind the main bezel to adjust for that. Very happy with the product. Hoping it has a long life. The only reason for 4 stars was the installation issues, which were not bad at all.

Arrived well packaged. Had to wire passing light connectors as supplied does not fit. Ran the yellow and blue wires thru the hole cut a hole in loom ran yellow and blue thru taped it back up. Spiced the yellows to the pruple on both sides which game me the amber signal. Wired the blues with the red from headlight and spliced it to the accessory connector now I have halos when bike is in accessory mode. Was thinking about wiring them to a switch. So i can Turn them on and off when in accessory mode. Halos themself are bright. Only thing i dont Like is with just halos on the passing lights shine red

Very bright upgrade from stock headlight and passing lights. Highly Recommend! Easy Install and they have a lot of adjustment. Had a set on my previous bike with the turn signals wired into the halos and they worked perfect.

I installed these on my 2018 HD Trike. Very bright. Seem to be built very well. Good bang for the buck. The instructions were not there, never figured out how to hook up the turn signals. No water or moisture has seeped in. They fit like factory. They work absolutely awesome. Would definitely recommend and buy again.

UPDATE: 4 months now and they begin to fog up during humid months. The main thing about this light that's not great is the high beam. There is practically no difference when turning on high beam vs low beam. You can tell that you turned on another light but, it doesn't cast a longer beam nor wider angle. It truly was pointless. Other product defects were 1) the screw holes in the new mounting ring that holds the light, are bigger than the factory screws from the OEM bezel. I had to run to Lowe's to buy some small washers. 2) There was no option to "connect" or turn on the red light feature on the passing lights, as shown in the photos. I tried connecting all of the different wires to test and no red.. yellow and white, but never red.

Great product and great service and fast delivery

Straight forward fit, did not need the wiring for the fitting and at night I can actually see where I am going now.

Was a little dubious about ordering this kit but no need as a cracking kit complete with everything you need except a couple off meters of single core wire if you wish to wire indicators into halo’s but well worth the effort and a little extra time. Would not hesitate in buying again.

En la descripción del contenido del envio, trae dos palabras que dan confusión. Carcasa cromada. Por el lugar de ubicación, uno como comprador piensa que se incluyen las carcasas para los faros anti-niebla. Pues NO, no se incluyen y ni la barra de soporte que en las fotos se ven. PERO los faros son de muy alta calidad y con ese precio, no me quejo de tener que comprar lo otro por separado.