D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server

The purchase of this product was made to hook up a HP LaserJet 2100 laser printer to our work network. It is equipped with a parallel port only and the computer I wanted to use it with was going to be on the other side of the room near the network switch. This product worked perfectly. The only problem you may encounter is when your network doesn't follow the default IP scheme that is pre-programmed into the unit. That was the case with my setup -- I had a block of IP's that I had to use on my work network. What you'll have to do if you need to follow a different scheme is, hook up a spare router (most routers use the default scheme that is the default in the print server), connect the print server and another computer (internet access is not required -- simply network access), setup the print server as is outlined in the instructions, log into the print server through a web browser, change the network configuration (IP, Subnet, gateway, etc.) to follow your required network settings, shut down the printer and print server, disconnect the print server from the spare router you set up, hook it to your real network router/switch/etc., attempt to connect to the print server through the web browser as you did in the temporary setup but this time use the new IP that you set up. If you did everything right, you should be able to get into the web app. If you can connect to the print server through the web app, you're ready to move on to the printer setup outlined in the instructions. It went smoothly for me the first time and has worked flawlessly for a few weeks. Also, it fit perfectly in the spot that my HP has the printer port located. It's actually inside the printer under a nice cover. That is actually nice because it protects it from getting knocked around in the back. It's a pretty small unit so it should fit fine in most printers.

Does the job if you need to network a printer that doesn't have a network connection. I have an older laser printer that really does the job and had one of these for over 10 years. Then it stopped working. Bought a new one. Instructions are useless if you have a Mac, and luckily I had one machine that still had the driver setup so once we copied the settings, all was working fine again.

plugged it in to the LPT port on the printer... added the power plug... connected directly to my computer with a network cable... changed the IP address to a fixed one compatible with our network... went into our router and reserved the ip... unplugged from my direct computer and connected it into our switch... loaded the drivers on my computers in our network and it started printing... what more could one want... keeps my old laser jet 4 connected to the network and working with new computers. Easy to set up. Tried a different one (t-link) that was horrible... this one is much easy! Has a web interface to manage the set up... the CD that came with it is useless... did not work on my computer.

The D-Link Parallel Print server works well for me. It allows me to connect my Mac and Linux laptop to my HP LaserJet printer. The unit does generate some heat, though, so I don't feel comfortable leaving it on. It could use a power switch to make shutting if off easier, or perhaps a low-power mode when not active? I would also like to see the ability to mount it on the wall. Because of it's bulk, it cannot connect directly to my HP printer, so I had to use an extender cable, and now I just have cable and Printer Server sitting on the back of my desk.

I purchased this print server and a new wireless router when my old combo wireless router/print server died. I installed the wireless router first, then added the printer. It was up and running in less than 15 minutes. However, I am familiar with network protocols and addressing schemes, and I can see where those without such knowledge might have problems. The default IP address for this device is 192.168.0.1, and all computers on your network must share that IP scheme to use the printer connected to this print server. In my experience, most routers (wireless or wired) use a default IP address of 192.168.1.1, so the IP address for the print server will need to be changed. Note the next-to-last number in the IP address is pre-set to zero; it must match that of the existing network (in my example, the number 1). The included instructions guide you to accessing the print server device - a few hoops to jump through but once you're there you can easily change the default IP address and you'll be able to access it directly in the future. Be sure to follow the directions exactly when creating the new printer port on your computer, particularly where you have to define the LPR Queue name. Others have referenced the list of compatible printers; here is a link to that list: [...] I have a Lexmark E series and it is working just fine. My network consists of WinXP and Win2000 machines.

This product and support is better to close shop asap to prevent further loses. The lady support I spoke to was not only limited in knowledge, she was arrogant and not user-friendly. I was feeling real good until I went through this lousy excercise, I have to take my hearth medicine to calm me down.

The D-Link DP-301P Print Server is an excellent product. This my second purchase of this product and it is reliable, compact, fast, and easy to set-up, with flexible options, especially in IP addressing. Very useful to get new life out of older printers with the Centronic/parallel only interface adding them to your network untethered to a computer. I have used this product for over two years,completly trouble free on my HP Deskjet printer. I purchased the second device when I was able to get a excellent deal on an older HP Laserjet 6P printer, and it installed flawlessly, and works with both XP and Vista. The documentation is excellent and easy to follow, making the install a simple process. I highly recommend this product.

I bought this to make my ancient-but-reliable HP LaserJet 5L work with a Windows 7 and a Mac computer. The good news is that I got it to function. The bad news is that it wasn't particularly easy or straightforward. I knew I was in trouble when I opened the box and saw that the documentation was dated 2003 and was all for Windows XP. I guess that it never occurred to D-Link that someone would want to use this gadget with a modern operating system. A visit to the D-Link web site didn't help - there was no documentation at all there and link to "Windows 7 Installation Instructions" only took me to a Page Not Found error. D-Link can't be bothered to update its web site. I tried to follow the Win XP instructions, which included changing the IP address of my computer. That enabled me to see the D-Link print server, but cut me off from the Internet. Not a good idea. In a final act of desperation, I called D-Link tech support, not expecting much. Then, a miracle occurred! In not too much time I actually got through to a real person who could speak English and who actually knew what she was talking about. She walked me through the installation for Win 7. It turns out that there's a secret (not clearly documented anywhere): You have to change the IP address on your computer so you can see the D-Link DP-302P+ print server, then log in to the print server and change its IP address to match the IP address of your router, then go back and un-change your computer's IP address back to automatic mode. When the IP addresses of your computer, the DP-301P+, and your router all line up, everything works. If not, it's a mess. There were no instructions anywhere for using this with a Mac machine, but I managed to muddle through. The DP-301P+ appears as a Windows device and the Mac was able to see it over the network and install the proper printer driver. So I wasted more time than I ever imagined but it at least everything works. D-Link could have saved themselves some tech support time and could have saved me some aggravation if they had taken a few minutes to update their documentation to the 21st century. But I guess that's too much to ask. I'll certainly think twice before buying something from them again.

very useful.. for printer lipi 6304 model