Vortex Tactical 30mm Riflescope Rings

I bought the Low 30mm version of this Ring to attach an Aimpoint ACO (value version of PRO) to a CZ Evo at the lowest possible height and it worked great! I was pulling out hairs trying to find the discontinued Aimpoint wide-ring (which originally cost $80). As I was searching I came across this Vortex ring and for the cheap price of $18! I elected to give it a try. I couldn’t be happier, it mounted the Aimpoint super low on the gun just like I wanted. The mechanism for mounting is somewhat reminiscent of my much more expensive Geissele Mount for my URGI, very robust. I totally recommend this ring for anyone looking to mount an Aimpoint PRO or ACO as low as possible.

Quality. Does what it is intended to do.

Very substantial and well made ring. As to be expected from Vortex. Service was actually ahead of time by 1 day. As used, the 30 MM ring fit the tube exactly and provided a stable platform. The six screws were correctly machined and torqued down perfectly. The base clamp fit the rail very well, no concerns. The only encountered problem, which was minor was the provided Allen wrench knocked off some of the finish on the screw heads leaving a minor bit of bare metal exposed, easily corrected with a bit of bluing, topped with paint. Again, very minor. A good, solid, well made ring.

Many gun snobs will insist that if you want to shoot sub MOA groups at any distance you must have the best of the best equipment. This is truet o some extent, but I believe in putting my money into shooting more and practicing before I dump money into really high end gear for the very minor improvements in shooter accuracy. I picked these rings up for my Remy 700 SPS Tactical AAC and a Primary Arms 4-16 scope. I needed some low profile rings because the factory stock has a terrible cheek rest. Mounting was simple and there are six screws per ring. I dropped these onto a 20MOA base and couldn't be happier with the fit and finish of these rings. I put about 60 rounds of .308 downrange in one session and the rings did not come loose at all and the scope held zero just fine. For me, these were a great value and functioned exactly as I needed. Note that you need to buy two of these as they only come one to a package for about $20. Every time I buy a Vortex product, I am more and more impressed with the quality of their products for the money you are spending.

I mounted these set of rings on Vortex Optics Viper HS 4-16x44 scope fit well,snug fit on 30mm diameter scope. The quality of these rings are solid and well made not not superior to other high end rings, its well balance not too light or heavy with I mounted on on the my Remington 700 SPS varmint 26 inch and My savage axis 2 . I ordered the Vortex Tactical low ring height just enough when mount its just enough clearance on the Vortex 4-16x44 scope and barrel, half inch gap scope and barrel. I like my scopes to sit low just my shooting preference. My only issue is the screws provided are very cheap. I manage to strip a few of them, using recommended 20-22 inch pound torgue on rings and big side screw 32-37 inch pounds I called Vortex sent me free replacement 5 screws, I bought these at $20.00 each X 2 at least Vortex should make at least good quality screws. Overall they are good, just dont over torque them or they will strip easily.

Easy installation and totally secure with a low profile

I needed a ring to mount a Vortex Strike Fire II on my Benelli M-4 (I know, kinda big, but my eyes just can't use the micros!). I already had the Vortex cantilever mount but it was too high for this application; the cantilever mount was perfect for my Noveske rifle but too high for the Benelli. I was initially apprehensive since I had heard some negative things about the screws being made of a soft material that deforms during mounting. However, I have had no problems with this mount. I have not run the gun hard yet, but I did get a chance to run about 50 rounds of 2 3/4" slugs and about 30 rounds of full power buckshot with no problems of the mount coming loose. I have not (nor intend to) done a drop test, so I can't attest to how strong the mount is when really stressed. What I can say is that during normal use, the mount is good to go. The fact that the M-4 has a non-standard rail has been an issue for some manufacturer's mounts (like LaRue), but this one mounted solid. The mount fits fine and for under $20 you really can't go wrong.

I have a Vortex Strikefire II I purchased for my Benelli turkey shotgun. As per my habit, I bought the Strikefire red dot shortly before the turkey opener. The red dot came with an extended "Z" shaped stanchion that raised the scope up 2-3/4". Way high off my cheek spot, had to scramble to find a system to raise up the stock comb to keep consistent spot weld to keep me in the game. Suffered through the spring season and committed to finding a solution to lower the red dot to normal human dimensions. Spec'ed out the Vortex Optics Tactical 30mm Riflescope Rings to solve my issue. After arrival and mounting couldn't be more pleased with the result. As I said, just what the doctor ordered.

Excellent

Exactly what I need to mount a strikefire red dot scope on my SKS. Fast shipping as now I can take rifle to range on the weekend.

Le produit est de grande qualité

Il y a des modèles exactement pareil , pour 2x moins cher et l’article n’est même pas arrivé à la date prévu , résultat compétition ratée .

Fits well and very sturdy. A great buy!!!