ORXPLUS Tools HSS Blade External Deburring Chamfer Tool 1/8"-3/4" (3-19mm)

I have used this on about a hundred workpieces and it has not dulled. The last usage was cutting a sharp point onto a 3/4" bolt and it worked perfectly. I use cutting fluid and run at a medium speed, periodically stopping to clear the chips with a wire brush. It works with the bit in the drill, or the workpiece in the drill and the bit in a vise. Occasionally, something will go off-center and the bevel on the workpiece no longer be smooth, but it seems to be a sign that you are running too fast. Slowing down and holding steady seems to resolve the issue. The cutters are not replaceable, but that should not be a concern. Highly recommended for anyone that has to cut any kind of round metal stock.

I had to cut down the studs on my rear axle as the ARP ones were too long to use with closed lugs nuts. The was able to go through all ten studs and chamfer down the sawed off end on all ten studs. I used a regular cordless drill set to the lower speed setting (1 instead of 2 for my older Dewalt) and the tool worked its magic on the ends. I'm not sure how many more studs it would have in it, but I know that it went through ten hardened studs with great results and still has material left in it for more work down the road. It's in my drill bit drawer now for use on the next round of all-thread, studs, or bolts I need to chop down and chamfer. The pictures show the first stud and the last stud I used this on as well as what the starting point was for each stud.

Works well once you figure out the secret. When I first got this bit I was pretty upset It would chatter like a jackhammer and leave a horrible wavy jagged surface finish on the parts. It took a bit of trial and error to finally figure out that if I set my drill to the slow mode and basically use my whole body weight into the drill I would get very reliably smooth cuts. At that point I was pretty impressed, the surface finish is near mirror like most of the time. The only issue I have found is the small channels that are supposed to curl the chips and eject them sometimes will hold on to the aluminum. this may not be an issue with steel but with aluminum it definitely means a lot of manually clearing those chips with your finger or some sort of pick. I bought this bit specifically to chamfer 5/8 in 6061 aluminum for one of the parts we make, at this point we have done a few hundred of these pins and the bit works like a champ. Quite honestly with a hand drill and our custom soft jaws clamping the pin, chamfering, flipping, and chamfering the other side is so dang quick I'm not quite sure you could chamfer these parts in a manual lathe or mill anywhere as fast as this process. All in all I would recommend this product. But if it doesn't work like intended play around with your drill pressure and speed.

I never write reviews, but I felt that this thing deserves one considering how much money it saved me. If you’re here then you probably are hard up; having been through the wringer trying to find something locally that will fix your problem with a bolt that can’t be replaced/changed. If so, then this is the tool you need. It “re-threaded” the end of a frame mounted stud on my truck in less than 10 seconds and saved me a ton of cash in the end. It’s high quality, strong and surprisingly durable. Get it!

What a surprise to use a cheap tool that actually works. Cuts like a hot knife through butter. Nuts thread on perfectly. Used on m6 and m10 bolts.

After reviewing many others, I decided to buy this ORX Plus Tools Deburring Drill Bit for bolt sizes 1/8"-3/4". It has saved me a lot of time on projects, maintenance and repairs. I mainly use it on threaded bolts. It's easy to use. It a quick attachment. The price is a little high but worth it. It's been nine months and it still works like new. I use a little bit of oil every now and then, just like with my regular drill bits. I have used it over forty times and always gets the job done nicely.

It worked very well for about 30 or so uses. The chuck snapped and now it is useless. If you do purchase this I'd advise against putting it in your impact. Use a drill instead. Not impressed with the quality *update * seller contacted me and replaced item for free. I appreciate this level of customer service

good

I was excited to try this product on a few threaded rods. It works as described, very quick and the results are perfect.

So far so good only had it a week

Plus besoin de mettre un écrou avant de couper une tige filetée la finition est parfaite quelle que soit le diamètre de la tige à couper

No duró ni 2 usadas. Se despega la cabeza del perno que se mete en el taladro.

Works well thanks