AudioQuest Tower RCA Audio Interconnect Cable (0.6m, Stereo Pair)

Tower interconnects RCA are truly some of the best interconnect cables I have heard. I have them connecting a classic 1969 Sansui SR-2050c turntable with a classic ADC XLM mark 3 cartridge. This connected to a vacuum tube PJL retro edition phono stage going to a B&K reference 30 preamp/processor. So my hifi is a step up above less expensive equipment. I have wireworld Polaris ll cables on some of my amplifiers so I have paid huge sums for quality cables. I have to say the tower series is now one of my all time favorite. I even use them on a very classic Pioneer rt1011 reel to reel. I am blown away on how good that deck made in 1975 sounds. Best value of any cable and best sound compaired to cables costing hundred's more.

Audioquest is high quality at an affordable price

I have always preferred Audioquest solid conductor over the stranded varieties such as Analysis Plus or DH Labs. These new designs are much more flexible than the old ones of 10-20 years ago. The price is now $33.95 for 1M but still a bargain. I see no need to pay $49.95 for Evergreen which is the same cable but with a pretty color braid. The differences over the red and white junk I/Cs are slight but at 1% of a $3,000.00 stereo, it is a good value. A little darker sound but smoother and more harmonically correct. The problem is the RCA's are so TIGHT. I am afraid I will break off my amp terminals trying to get these things off. I considered using some dielectric grease but don't want to get grease all over everything. Besides, I do not think it would help much. What makes matters worse is the connectors are small diameter, polished smooth shiny plastic , and close together so it is really hard to get a good grip on them. So I end up trying to pry my fingernail under the end or (worse) pulling on the cable to get it off. Also because of the dual wire construction, you have to put both RCA's on the terminals at the same time or twist them pretty bad if you do one at a time. This is especially bad for AQ because another problem with AQ is the welded connections. They are great for optimum conductibility but tend to be brittle and break if bent or twisted. If you are going to put them on once and have a nice straight exit off the RCA jacks with no sharp bends, these Towers are highly recommended.

This is the only AudioQuest product line worth the money. AudioQuest loves to rip people off with many of their other product lines but the Tower series are a great value. I love the single cable design that makes cable management much easier. It is somehow still shielded enough internally where I don't any crosstalk between the channels or any interference from other nearby cables. The connectors are well made and stay in place (almost too well) on every piece of equipment I've tried them on. They stay in place so well that due to the shape of the plug it can be hard to get a good enough grip on it to unplug it. I standardized on Tower series cables after tracing a problem I had been having down to a bad RCA cable, and I decided then and there to give up my former practice of just using whatever cables I had on hand since "it doesn't make a difference". It completely can make a difference, but only in build quality and usability, not in the ways that AudioQuest and other "high end" audio accessory companies want you to believe.

Decided to wire my entire system with these Audioquest Tower analog and Forest digital cables. Before this, I was using the super thick Monoprice RCA and Toslink cables that are also available here on Amazon. When I had the Monoprice cables properly grounded and wired from my turntable to my preamplifier, there was a very apparent hum, or buzz, in the left channel of my stereo system at higher volumes. When I wired it with these Audioquest Tower cables, the hum went away completely... Solving my issue. As far as sound quality, it's hard to say for sure. It does seem that the entire system seems tighter and more dynamic (especially in the mids and lows). The fact that these cables got rid of the buzz issue I was having is enough on its own for me to recommend these cables over the cheaper options. It's also nice to have a thinner, more flexible cable. Give these a shot, the price is right. I doubt you'll be disappointed.

Okay, cables for audio equipment are a very controversial subject. Some people don’t care as long as they work and they get sound. The best cables are no cables. But because they are a necessity to connect separate gear. They shouldn’t change the signal or let unwanted signals in. And that is exactly what these entry level AudioQuest Tower rca to rca anolog cables do. Notice I didn’t mention how the cables sound, because if they are doing their job they shouldn’t have a sound. These are a great value and high quality. I can highly recommend these and will purchase again.

Well made cables. I do not buy into the hype about cables sounding different, but I am sick of crappy cables that go faulty within weeks or months and either don't grip properly or are too tight. These are just perfect with high quality connectors. 6/1/18 - well, I am revising my review. These cables went bad rather quickly and are not worth the money - became intermittent. I think the design does not penetrate RCA sockets properly.

I used these for my car stereo to replace old Rockford fosgate cables connecting a line out converter (lc7i) to amplifier (jl 100x4 channel). My tweeters and midrange speakers have zero detectable noise. With other cables there was a noticable hum, and when turning on the system some cracks and pops. I have seen these issues disappear when using these new audioquest cables. Also noted an across the board sound quality improvement. I'm super happy a simple cable can make such a big difference.

Todo perfecto, conectores bien sellados bañados en oro y el cable con un aislamiento de mucha calidad y bien construido.100% recomendado.

Muy bien, calidad muy buena. Recomiendo comprar estos o mejores, nunca de los baratos, yo tuve que comprar de buenos porque en mi equipo con tocadiscos, si ponia de los baratos sonaban un monton de ruidos desagradables. Hay que poner cables buenos, lo barato sale caro, pero estos estan muy bien

El cable viene muy bien presentado. Tiene una rigidez media. Los conectores RCA vienen apretaditos. Usado para conectar plato a amplificador, teniendo en cuenta que traen grabadas flechas de conexión (dirección de la señal). En líneas generales, una buena relación calidad-precio, teniendo en cuenta que son una gama de entrada de la marca, pero que cumplen perfectamente, sin necesidad de un gasto extraordinario.

Sehr gutes Produkt, schnelle Lieferung und bedeutend günstiger als im Fachhandel

Ottimo cavetto mi serviva proprio