Dupli-Color AFM0229 Oxford White Ford Exact-Match Scratch Fix All-in-1 Touch-Up Paint - 0.5 oz (0.25 oz. Paint Color and 0.25 oz. of Clear)

Matches the color perfectly and easy to use. Coverage is great.

I'll cover a few things first, the packaging is confusing. ALWAYS stand the paint with the fat end down, with the label facing you and readable, remove the top cap by unscrewing it and the brush will be facing down into the paint, unscrew the bottom to access the foam brush with the clear coat. do NOT hold the paint with the label upside down or you will spill everything when you open it. If you are repairing your Tesla Model 3 Rims, the color is spot on. To make a perfect repair, do not rush and just apply the paint to the scraped rim. . Just applying paint will look better than the scrapes, but not very good. Get fine grit sand paper and sand the surface flat first The color match will be so close you will not spot it afterwards. I sanded with two different grit sandpaper, applied gray primer, and let it dry for 24 hours before applying the first coat of paint. Let it dry a good amount of time, because the first coat of paint will tend to liquefy if you apply the second coat too soon. The paint is actually quite thick, so be aware that when you start the painting process. I didn't use the clearcoat because the color and shine are so close to the original paint since I scraped my rim after owning my new car only three days. I compiled this from my experience using it and confirming the advice given by other users. A side note, the paint has a pressure sensitive point that will apply paint by pressing the tip to the object you wish to apply the paint to. I don't recommend using it on the rims. it tends to apply thick blobs. Also, there is very little paint in the kit, so be sparing with it. The picture is the actual repaired rim, and the damage was pretty obvious. Take your time, and be patient, the repair will look great! I hope this helps,

Works well for small chips and scratches. User needs to be aware that the original paint has faded and that the touched-up areas really stand out

Accidentally left it in my trunk all winter and it still works wonders! Absolutely worked perfect for my Lexus. Totally worth the money. Hasn’t chipped whatsoever and there’s been paint on all winter from last summer.

Love this item, quality is good the finish looks good the drying time didn't take long to dry. The coverage it covered all that I want to covered. Removability is good. The consistency is awesome and amazing. This item is amazing and awesome when I run out I will get this item again.

I got this for a Ford that is a pearlescent white. If you use this color alone, it will NOT match the car's original color if the scratch is anything more than superficial. If you're down to bare metal or black plastic, you have more work to do. I got this to paint a replacement backup sensor that comes unpainted (black plastic). In order to get it to match, I sprayed the sensor with primer, let that dry. Then I sprayed the primer with plain white. Next, I used the product being reviewed here since it adds the metallic/pearlescent finish. Finally, you have to clearcoat it or it will be a matte finish. If you just brush this on anything other than a white finish, it will just be metallic silver. You must also add a gloss to it. The finished product once you do everything properly, is a very good match to the original, but you can't just smear this stuff on by itself. The only part I didn't like is that the consistency is a lot runny. If you're not careful, the surface will not be even. Also, it will take at least two light coats applied gently. The stuff in the pen has a lot of solvent and will remove the white layer below if you're not careful. One quick brushstroke and be done. In the photo, you can see the upper right (old) sensor side was primed and painted with the Duplicolor brush. It is silver, not white. On the face of the sensor, you can see the actual car color. On the lower left sensor side, you can see a sloppy test with primer, white, and Duplicolor (did not gloss the test part).

Perfect color match to fill in dits on my 2009 Toyota Corolla Super White hood and all around car! Could hardly tell where it was afterward! Easy to use, dries quick. Was able to polish car almost immediately after use.

I was in love with this product as soon as I used it. I bought my touch up paint from my dealership and it was horrible. Why would a dealership have a worse quality product I asked myself before I ordered it, but the color is near perfect and the clear coat helps smooth the surface just like it says to make it look nearly flawless. The only suggestion I have about the clear coat is just brush over the area once otherwise it will look sticky. Love this product otherwise!

It doesn't work, I tried using it and the the thing would not work, the brush part of the touch up paint would not open either, i tried almost anything to open it but the thing would not budge, I'm very upset with my purchase and know never to buy any Dupli-Color products ever again

Touch up on my Camaro

Good match

Good quality. Perfect match to my colour. Works much better than the pencil I originally bought at the dealer.

Proper GM paint for my 2002 Camaro SS. Super!