amFilm Auto-Alignment OneTouch for Nintendo Switch 2 Screen Protector 2025 | Tempered Glass Accessories, 30s Install, Bubble Free, Scratch & Drop Resistant, Touch Sensitive, 7.9'' Transparent [2 Pack]

I've installed a lot of screen protectors over the years, and this was one of the easiest ones I've used. The installation system made it really simple to get everything lined up, and it fit my Switch 2 perfectly on the first try. The matte finish was the main reason I bought it, and I'm happy to say it doesn't make the screen look blurry or washed out. The display still looks great while also helping cut down on glare and fingerprints. The protector itself feels high quality and doesn't feel cheap once it's installed. My only minor complaint is that it comes with two protectors. I only needed one, so I'm not really sure what I'll do with the second one. It would've been nice if there were a single-pack option for people who don't need a backup. Overall though, I'm really happy with it. Easy installation, perfect fit, and a quality matte finish that doesn't take away from the picture. I'd definitely recommend it.

I'll start by admitting that I am a longtime non-fan of screen protectors. Every time I try to use them I get bubbles, dust, anxiety and a general headache from trying to apply them properly. I tried before with the Switch 1 and failed twice and gave up. With my shiny new Switch 2, I decided to give it another go. Luckily the process is greatly improved though I did run into some trouble again. After wiping and cleaning the screen I applied the bracket after peeling the film coating off. The bracket frame design is really helpful with the top clearly labeled and made a huge difference. I pressed down and the screen was applied nicely. But to my horror, some tiny dust and hair had found the slightest opportunity to intrude on the edges so I had a few small bubbles. Luckily the kit includes some handy dust tape strips so I carefully lifted a corner of the screen protector and was able to surgically extract the tiny dust threads which cleared the bubbles. The only evidence that remains is a tiny speck in the corner where I had to lift it up to get the dust. I could probably remove it if I tried but it's more than good enough for me and invisible most of the time and luckily only on the outer bezel. Now if someone like me can successfully apply the protector, there is surely hope for other former screen protector haters. I'm very happy to report that there are no bubbles, no screen color or clarity degradation, no touch sensitivity lost, and my underlying screen feels well protected. I wish Nintendo just applied one at the factory with an easy replacement process but this went much better than I had expected. I'm so glad that the process has been streamlined and improved so much, I can easily recommend these screen protectors.

I chose this brand because of the easy application guide. It worked great! And....you get 2 screen protectors in case you mess up the installation of the first one. You also get the cleaning kits, and very large duxt grabbers taht cover the entire screen all at once. They fit great on my switch 2,a nd it was super easy to install them. Take off the piece of plastic, put the guide securely on your switch, and press down a streak from left to right. The protector attaches to your screen with barely any air bubbles. If you do end up with some, you can press them out of gently lift the protector and smooth out again. It is very responsive so much so , that it's like nothing is on the screen, and it looks great! I think these will last, and if I need to replace one, I have a spare. Good to have, no problems to date, and it seems durable enough where my screen is protected against anything that may otherwise cause some damage.

Absolutely perfect, everything was so convenient and easy to install. It felt so satisfying seeing the protection film go into place. No dust, glossy look, and fit perfectly. Seriously, after losing my mind with the amount of bubbles that wouldn’t go away with the last cover; I couldn’t be happier. And!! It comes with extra in case you mess up or if you need a replacement. Really, REALLY RECOMMEND!!!

It's as advertised, easiest install I've ever done. I've tried installing my own on phones, tablets, etc. and always struggled. Bubbles, lifting, etc. Not this one, the videos made it look a little too easy but yeah it was just that simple. Had two little bubbles on install, both slid to the edge without issue, done. Alignment is perfect, can't even tell it's on there. Having a second one is a great safety net, but you won't need it.

Works perfectly. Application was quick and easy and it didn't have any air bubbles at all. The finish is slightly matte and looks good.

the alignment tool was a amazing for the fit of my device, it’s super accurate and crisp on the edges of the device screen. I appreciate the cleaning prep accessories to ensure a clean and easy application. fingerprint resistant and doesn’t noticeably deter the original screen color quality. no bubbles with CORRECT installation techniques. if you get bubbles, that’s a skill issue. the only reason why I give it four stars is because it’s not truly matte. there is a soft reflection and my only assumption to guess is that kids would be unhappy with true matte display quality. matte can look a bit pixel-y but is easy to ignore with use of the device. I value not having to see reflections during gameplay or focusing on the device.

This is extremely easy to put on. One try one application and it went on perfect. If you switch is brand new it is way easier. Since I didn’t have to clean the screen beforehand, there were no dust particles to get in between the screen protector. You peel where it says step 1, you align the tray, slide your finger across the back and then pull it off. Any bubbles you squeegee them out. They should have included a squeegee and microfiber cloth in the kit but that’s why the price is so low. If you’ve already had your switch and you’re just now putting a screen protector on, you need to do the due diligence of cleaning the screen thoroughly first! The kit doesn’t include an alcohol wipe, use that to get all the gunk off, let it dry. Get a microfiber cloth and clean the screen kind of like you’re buffing it. Make sure you’re in a well area and tilt the switch towards the light so you can actually see if there’s any dust particles any grime you didn’t get off or any lent left over from the microfiber towel. You need to be meticulous in this step. Your preparation determines how good the application of the screen protector is going to be. Once you are sure that you’ve tilted to switch and a few angles to make sure that it is clean then you can follow my steps above to apply the screen protector. Initially, I was gonna go with a different screen protector brand from Spigen but I did not like how it didn’t cover all the way to the edge of the screen. This one does, it covers 100% of the screen and it’s much cheaper. You also get two with two separate trays. You don’t have to put the screen protector in the trey line it up yourself and then put it on the switch. everything is pre-install. You also get 2 of them, which is great. As for what the actual screen protector looks like, it’s glossy and seamless that’s my favorite part about it. The fitness is immaculate for the price. You can’t actually tell a screen protector is on and that’s the look I was going for. I’d highly recommend this.

I have always been a bit hopeless at putting on screen protectors and usually end up with at least one annoying bubble or a piece of dust trapped right in the middle. This OneTouch kit from amFilm is a total game changer for the new Switch. The alignment tool makes it basically impossible to mess up; you just clean the screen, pop the tray over the console, and it seats itself perfectly in seconds. The glass itself is crystal clear and doesn't seem to affect the touch sensitivity at all which was my main worry for handheld play. It feels nice and smooth under the thumb and the oleophobic coating actually does a decent job of keeping those greasy fingerprints at bay. It is a massive relief to have that 9H protection on such a big screen without the usual headache of a manual application. If you have just picked up the Switch 2 and want peace of mind, this is the one to get.

He puesto un montón de protectores a lo largo de mi vida, fundamentalmente en móviles. Este es sin duda el mejor que he puesto, tanto a nivel calidad, como la facilidad. Se ajusta perfectamente a la pantalla de la consola y para todo lo que trae me parece hasta barato. No busques otro, esto es lo que necesitas

Ich habe mir diese Display-Schutzfolie für meine Nintendo Switch 2 bestellt, um das neue Gerät direkt optimal vor Kratzern und Alltagseinflüssen zu schützen – und ich bin begeistert! Lieferumfang & Ersteindruck: Schon beim Öffnen der Verpackung merkt man, dass hier auf Qualität geachtet wurde. Enthalten waren gleich zwei Schutzgläser – perfekt als Reserve oder für ein zweites Gerät. Außerdem lag alles bei, was man für eine saubere und einfache Installation benötigt: Reinigungstücher, Staubabsorber und sogar eine Anleitung. Sehr durchdacht! Installation: Die Anbringung war kinderleicht. Dank der präzisen Passform und der mitgelieferten Hilfsmittel ließ sich das Glas blasenfrei und exakt auf dem Display positionieren. Selbst ohne viel Erfahrung war die Montage in wenigen Minuten erledigt. Qualität & Schutz: Das Schutzglas fühlt sich sehr hochwertig an – nicht zu dick, aber trotzdem robust. Es beeinträchtigt weder die Touch-Funktion noch die Bildqualität. Im Gegenteil: Das Display sieht mit der Folie fast noch besser aus und bleibt absolut klar. Besonders positiv: Im Dock passt alles einwandfrei – nichts hakt, und der Displayschutz bleibt kratzfrei, auch beim häufigen Ein- und Ausstecken. Unterwegs schützt das Glas zuverlässig vor Schmutz, Stößen und Kratzern im Rucksack oder in der Tasche. Fazit: Ein rundum überzeugendes Produkt, das ich jedem Nintendo Switch 2 Besitzer wärmstens empfehlen kann. Hochwertig verarbeitet, einfach zu installieren und mit durchdachtem Zubehör. Genau so soll es sein!

انصح الجميع بإقتنائه فور شراء الجهاز سهل التثبيت وارشادات واضحة وجودة ممتازة ووضوح عالي لم اعاني مثلما عانيت مع غير هذه الشركة

I bought this for my original Nintendo Switch (2017 model) and honestly, it’s one of the best screen protectors I’ve ever used. I’ve tried a few before, but this one really stands out — especially thanks to the auto-alignment tray, which made installation super smooth and stress-free. Ease of Application: The included applicator lined it up perfectly in seconds. I had zero major bubbles, just a small one in the corner at first, but I easily lifted and pressed it back down — it sealed perfectly. It also came with a wet wipe, dry cloth, and dust removal sticker, which really helped make sure the screen was clean before applying. Fit & Clarity: It fits the 6.2” screen perfectly, covers edge to edge with precise cutouts. That said, one of the cutouts (possibly the IR sensor) was slightly covered — I think the protector might’ve been inserted into the applicator the wrong way round. However, it doesn’t affect performance at all and only matters for Labo, which I don’t use. Adhesive Quality: The adhesive is strong and smooth. Once it’s on, it doesn’t shift, and there’s no peeling or air pockets — it looks like it came with the Switch from the factory. Durability & Touch Sensitivity: After applying it, the screen still feels super smooth and responsive, and it’s done a great job resisting fingerprints and scratches. It has an anti-glare finish too, which is helpful in brighter rooms. Value for Money: For the price (especially since it’s a 2-pack), it’s absolutely worth it. You’re getting a top-tier product that feels like something much more expensive. The alignment tray alone is worth it — makes you feel like a pro installer! ⸻ 🟢 Final verdict: If you want a reliable, easy-to-apply, and great quality screen protector for your OG Switch, don’t hesitate — this is the one to get.