MOES Zigbee 3 Way Light Switch 2 Gang. Require Neutral Wire | Smart Wall Switches Single Pole, Support Remote Control, Work with Alexa/Google Assistant

Excellent Zigbee light switch. I have over a dozen of these in my 35 device zigbee network and no dropouts.... ever. Stable, Fast acting and easy to wire. Good instructions and solid construction. Works as advertised in single pole AND 3 way configurations with either a traditional or smart 2nd switch. Absolutely silent apart from the soft click when toggling the device on/off which happens with virtually all smart switches and is simply good tactile feedback for operation. Configured the switch for Homekit integration thru Home Assistant. FAR superior to WiFi switches. More stable and faster acting. Buy in 4 gang packs and they are VERY inexpensive! For the user who had an issue with the 3 way configuration simply switch the traveler and load wires and it will function correctly. It absolutely does work in 3 way installs with a non-smart 2nd switch. It reports the toggle state correctly when operating the circuit from either switch. Verified in multiple locations.

This was an easy install and looks great. Only complaint is the loud click you hear when you turn it off or on physically or through an app/home automation. Besides that it works flawless and is very responsive. Something I didnt realize was this was only recognized as a zigbee endpoint and not a router which is what i was looking for. That was human error for not reading though.

Using this with Zigbee on Home Assistant and it’s been working great! Installation was easy. No noise, it’s very quiet other than the audible click when you turn it on and off either via HA or physically. Feels high quality but only time will tell. I appreciate the O ring ambient light. I wish it stays on even if the switch is off. Compatibility with USA light switch wiring.

The device connects easily to the ZigBee router, but when you turn the lights off from the other outlet it doesn't change the state, making it impossible to send commands "off lights" since it thinks it is already off. Tested in a 3 way configuration with this device connecting to the light, load comind through either traveler wire.

I bought this switch because I needed a Zigbee-based 2-gang wall switch for a US standard box, and options in this category are quite limited. From a functionality standpoint, it does what it is supposed to do. The switch pairs successfully with Zigbee2MQTT (it appears as a Tuya TS0001 device), acts as a router, and works well with Home Assistant for basic on/off control. That said, there are some practical installation details that I wish had been clearer before purchasing. While the description mentions a push-button actuator (which is accurate), the listing also states “Connector Type: Screw Terminals.” In my case, the units came with permanently attached wires rather than screw terminals. This added extra bulk inside the wall box and made installation more challenging than expected. The switch body itself is also fairly large, comparable to a GFCI outlet, and since neutral and ground are required, wall box space can become tight quickly. I would recommend checking box depth and available space carefully before buying. The included screwless wall plate fits very tightly once installed. I found it difficult to remove without worrying about damaging the thin plastic. Aligning two switch modules correctly for the plate also required some trial and error, as a small gap between the modules was necessary for proper fit. Overall, the switch works reliably once installed, but the physical size, wiring style, and wall plate fit make installation more involved than the product photos suggest. If you are comfortable dealing with tight electrical boxes and careful alignment, it can be a workable solution.

Took about 10 minutes to install and showed up in Home Assistant super quick.

There are not a lot of option for 2 way Zigbee switch, so this is probably the best choice. The main issue is that it does not always report the correct state (i.e., if the light is on or off) in the app when using the other 'dumb' switch. I think it senses current to determine the state, but for some reason does not always work. I do appreciate that you can turn off the indicator light. Good switch action and feels quality built.

Great deal! Quality product at 1/3 the price of others. Only one needed for a three way circuit. You can keep one of your “dumb” switches and just buy this. Seamlessly connected to home assistant. No need to use the manufacturer’s app. Some reviews mentioned the loud clicking sound, and they were right! Don’t put this someplace where that might be a problem for you.