2-Pack Matte Screen Protector Fits Kobo Libra Colour 7 Inches 2024/Kobo Libra 2 E-Reader 7" 2021, Premium PET Anti-Glare Screen Protective Film Screen Protector

The instructions are clear and it is super easy to apply. Besides the stickers they added a small card with cloth on one side to use instead of a card. When last time I tried smoothing it out (a different product) with a credit card it scratched the protector. This one was super helpful abd did it's job perfectly. I managed to put the protector from my first try.

Messed up the application of the first one, but that was definitely due to user error. I love annotating so buying a matte screen protector was a must - this was a good choice! Good value for the price, will definitely buy more after natural wear and tear from how much I annotate lol.

Fit well and easy to apply. Able to use a stylus without issue and glad to not see any scratching in the screen. Affordable. Have been using for months with no problems.

Low quality, impossible to install without dust or bubbles. I'm super frustrated because I just wasted $10 on literal garbage there was already dust on the sticky side of the screen protector on both of the ones I received before I even installed it. I'm actually pretty good at installing screen protectors and do it regularly because I get a screen protector for literally every device I own and these are the worst ones I have ever received... the included accessories for applying are also unbelievably awful and actively flake off dust onto the product as you're trying to apply it. I made the mistake of my first attempt using the included material and after that was a bust I use my own stuff and it didn't matter cause there was still dust already on it before I pulled off the protective film. Don't waste your money.

It took me FIVE of these protectors (so three orders) to finally get one adhered correctly. Beware - a single two-pack of these is likely to be a training ground for how to install them, not actually usable. - Protector #1: tons of dust specks between the screen and protector. Tons of bubbles that wouldn't squeeze out. Unusable, removed. - Protector #2: Misaligned, overlapped plastic bezels of screen, had to be removed. At this point I tried a tempered glass protector instead, which adhered just fine, but messes up the touchscreen behavior (making it often not respond to touch at all), so had to be removed. - Protector #3: Bubbles that wouldn't squeeze out, trying to remove and re-apply was hopeless (wouldn't re-adhere) - Protector #4: Again misaligned, ended up so angled that it left a huge flap in the corner of the screen. Had to use that flap to pull the whole protector off and trash YET ANOTHER of these. I was super frustrated at this point, but decided to try one last package before giving up. First, dry-fit the protector with both sides' protective plastic film still applied. Use the guide stickers, adhered to the #2 side protective film as a hinge (on the bottom left side) and a lever (on the top right side). Once dry-fit, lift using the lever side to flip the protector over, clean the reader screen (dust specks, oils, etc), now remove the #1 side protective film and use the lever sticker to flip it back over. While the protector lands onto the screen, use the provided squeegee tool to adhere it flat. Note that the guide stickers will hold the corners off the screen, this is fine; it's actually ideal because you can squeegee any air bubbles in the middle that appear, towards those edges, allowing them to escape before final adhesion. Now with the entire protector installed and adhered minus the guide sticker corners, use the guide sticker in the bottom left (your hinge) to remove the #2 (top) side protective film (it will lift right up when you pull the guide sticker off, the adhesive on those guide stickers is unreasonably strong). Peel up and to the right, and eventually you'll be removing your lever sticker from the top right. Squeegee your corners flat. Enjoy, your screen protector should now be installed, flush, and fully contained inside the bezels of the screen. Does not interfere with touchscreen usage, and only barely, if at all really, impacts the already-muted hues of the Kaleido 3 panel on the Libra Colour. Feels good to the touch. Should protect the screen well. I hope with all my might I never have to replace this with Protector #6 (still in the box), because the application process is comically insane for mere mortals to achieve. Applying PET protectors is nothing like applying tempered glass, but alas, if you want the touchscreen on this device to work and a good feeling surface for the pen to write against, PET is what you're stuck with.

Very easy to put on with apparently less trouble with bubbles. Nice surface. Doesn't seem to interefere with screen sensitivity.

This fit my Kobo Libra Colour perfectly! It was easy to put on and came with all the necessary things to apply. It protects the screen from scratches and fingerprints and I'm pleased with how it looks.

I've installed a lot of screen protectors over my life. I've learned some tricks that help. 1. Run the shower. The water vapor helps take dust out of the air. This is the best thing you can do to help you get a clean install. 2. Use a hinge. Moko did provide some materials for this, but I prefer some duct tape. Duct tape also works to help remove any stray dust, kind of like the dust removers that are supplied. 3. Leave the factory protective coating on until you can apply the screen protector. You can still clean the screen with the alcohol wipe. If you have a blower for photography lenses and sensors it can be helpful. 4. Work from your hinge either down or across using the supplied card or a credit card to get out bubbles. Don't take the the entire backing off at the start. Peel it as you go working the bubbles out. If you get bubbles or dust, peel back up to the problem and deal with it. For dust use the adhesive from duct tape or the dust buster to remove. I did all of the above when trying to install on a brand new Kobo Libra Colour. It was really tough to get a bubble free install. I ended up ditching the screen saver because I wasn't happy. I managed to do better on the second one but still ended up with a couple of tiny bubbles near the edges. The bubbles aren't noticeable except to me and are invisible when the reader is turned on. I will say that I do really like the antiglare finish. It's also very nice to write on. Also, I don't generally take the top protective layer off until I have the screen saver installed. For this install I found it difficult to see bubbles with the top layer on. I took it off initially for my second attempt.

Love theses screen protectors. It is very thick screen protector unlike most others. Held up to my 3 year old . The screen protector actually recently cracked but it did its job and protected the actual screen. Great value for the quality.

Très bien, fini mat, attention il faut être très méticuleux pour ne pas avoir de bulles, il faut appliquer le film de protection tout en glissant la raclette simultanément, j’ai réussi du deuxième coup. Je recommande

A little harder to apply but they don’t make the screen lose that much quality so that’s a plus

Non ho molto da dire, essenzialmente la prima pellicola è stata scomoda da applicare poiché lascia delle porzioni del mio Kobo Libra 2 scoperte, ho provato ad applicare la seconda centrandola di più per compensare questo difetto dopo aver rimosso la prima e ho notato come avesse un alone in partenza guardando in controluce (ho usato i guanti monouso e seguito tutti i crismi), pessimo oggetto, ho deciso di usare il Kobo senza pellicola solo con custodia e case protettivo, potessi darei 0 stelle. EDIT: Il venditore è stato estremamente gentile, mi ha rimborsato completamente e mi ha mandato nuovamente l'articolo con delle istruzioni che mi hanno permesso di installarlo correttamente, la pellicola sembra resistente e di buona qualità, unico neo è che mi sembra che renda un pochino meno definito lo schermo.

Genial. Por los comentarios, creí que sería difícil de colocar. No he tenido problema ninguno. No hay reflejos raros, la pantalla del Kobo se sigue viendo mate y ahora puedo usar el lápiz sin miedo a estropear la pantalla. El tacto es muy gustoso, no es liso. Lo he puesto sin problema, como si fuera el cristal templado del teléfono: un poco de cuidado y paciencia y ajuste perfecto. No retrasa en absoluto la respuesta táctil de la pantalla. Muy soprendida por la buena calidad.