SFS V2.0 Smart Filament Sensor,Filament Runout Sensor Support Klipper/Marlin/RRF 1.75mm SKR MINI E3/Octopus for Ender 3 FDM 3D Printer | Support Klipper/Marlin/RRF 1.75mm SKR MINI E3/Octopus for Ender 3 FDM 3D Printer

Works very well! I bought it with the expectation that I would have to mod it to work with the Anycubic Kobra S1 and I did. All I needed to do was make the 3 pole switch either HIGH or LOW instead of just open or closed. I then connected the wires to the printer and it worked flawlessly! It took some research and setting up but not as much as I thought it would.

I used to have a filament sensor that was made from an old endstop that seems to work half the time. this new btt filament sensor works everytime, it also doesnt matter what direction you feed the filament in which is a huge plus as my old one only let me feed it in 1 direction. It only took 5 min to install including the coding i had to do for klipper!!!!

I have had two of these defective right out of the box. I would not recommend. The first one the encoder would not work consistently. I spent hours trying to figure it out until I replace it and the replacement worked fine. The second unit the switch circuit would not function. Unfortunately, my current setup and programming is designed to use this product. But, I will be redesigning to use something of higher quality.

This sensor really saves prints. I tried to print some dragon using Silk PLA and I failed three times due to clogging.I decided to upgrade my printer and install this sensor and for now it paused my prints three times due to clogging but I was able to resume printing after clogging. So I'm continuing to print.Minor issue with sensor - you will need to mount them - I found the custom mount compatible with my print head (ender sprite pro) and printed them.P. S. The above is definitely a filament issue. I printed a lot without any clogging but glad to see I'm able to overcome filament clogging issue with this sensor.

Requires a lot of tweaking in your printer.cfg file. Don't have it activated during calibration prints. Looks sick. Great value. Finicky, so you have to tweak bounce back and measure distance

I had really high hopes for this sensor. I installed it and initially had pretty good results.Unfortunately, shortly after I installed it, the sensor started throwing all sorts of random errors when printing at higher speed. Multiple prints failed due to the sensor throwing an error saying filament had run out while it clearly still had filament in it. I worked through all diagnostics with BTT, I also completely disassembled the sensor because it was possible some filament dust could have disrupted the sensor. After completely disassembling, cleaning, and reassembling it the sensor worked a little bit better.Unfortunately though it started throwing errors after 1 print. After really trying to make this work I found I could not get a consistent result with this sensor. I had to remove it because randomly failing prints was causing too much frustration for no real value.I would steer clear of this sensor and just build one with an end stop sensor, a ball bearing, and a housing running the filament through it.

I run this on a modified Ender 3 Pro with a BTT SKR Mini motherboard. The sensor plugs right into the MB. I'm running Klipper so configuration is straight forward (details on the BTT SFS V2 Github repository). I'm giving it 3 stars because the case somewhat brittle. I have been running it for a year and just noticed that the end cap is cracked, back cover has a crack running thru a heat insert and small cracks in the main body. While I don't remember it, it is possible it was dropped and that caused the damage. For those having a hard time feeding filament thru here is a tip; on the output Bowden tube chamfer the insertion edge with a 3mm drill bit in a pin vise. I had to follow up with a 2mm in the other opening as the tube became a little smushed from folding it with needle nose pliers. I had jamming issues and with this tweak they went away. Also, make sure you straighten the filament before insertion, that helps as well.

The packaging from Bigtreetech looks great and really stand above other products. I have not installed the filament sensor yet but once I do I’ll come back and update it. So far I’m impressed with the look and feel of the product. I own other products and have been very pleased so far!