Comgrow PLA 3D Printer Filament, 3D Printer PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 2 Rolls of 1KG Spool PLA Grey

Prints great and spooled nice and cleanly. Quality product comes packed neatly and free of moisture, making it easy to use. Will definitely buy more of this brand. Great value overall and liking it a lot! Gray and white in photo are from this pack.

Great budget filament and works great in my K1Cs and my K2plus. Does not play well with the CFS on the K2plus. The reel is not perfectly even on most of these and it has some issues during filament retract. I plan on spooling it to a plastic reel with a rewinder. They work great on the K1C and my other Enders. And the K2 when on a plastic rell with the CFS. A little time to respool not too long.

Over the years, I’ve used plenty of brands, and plenty of materials. Comgrow PLA has been a game changer in terms of quality, and ease of use. For example, I recently tried SUNLU and had so many issues. Clogged hot end, adhesion issues (with both stock and glass bed), so many clogged nozzles, etc. Comgrow has been so easy to use, and the quality is on-par, if not better, than any other brand I’ve used. It sticks to the bed, glass or stock, like glue. Funny enough, I don’t even need bed adhesives to get it to stick, it’s that good. I feel comfortable printing multiple parts at once using Comgrow with how consistent it is. Settings: Stock Cura settings! (Ender 3) 200° Nozzle, 50° bed. And it works perfectly. .2 layer height, and .16 work the best. Anything above that is hit or miss, but I blame the printer for that. Overall, I HIGHLY recommend comgrows PLA.

This color is a beautiful deep teal. It prints well. I will buy this again

It’s stable PLA and is pretty good at lower and higher speeds. Works best at its glass levels. It should stay at 200C or below, anything higher it’s strings and zits. Best temp I have found 200 at a speed 45mm/s and a retraction of 45mm/s with a hotbed of 60 or 70 depending on ambient temp or if you have a cover. Or 190 at 30 mm/s This is using an Ender 3 S1 Pro with direct drive, with 300+ hot end and Klipper Firmware. At higher speeds keep it at 200 and it works well at 60mm/s. I tried it on a buddy’s Neptune 3 pro and it differs greatly. Hotend needs to be at 210 no hot bed if you have one and a speed of 60mm/s with a retraction of 45-50mm/s. On my brother in laws Bambu keep it at the suggested levels on the PLA works best. It’s a nice bright color and even works well with minis and larger projects as well. Cons - it strings easily and is prone to elephants foot at higher then suggest temps. Details are hit and miss. Pros - Adheres to the plate like a rockstar, cleans up easily if you need to sand it, and doesn’t require a lot of filament, which means great on the pocketbook. Suggestion: If you do minis, do them with a .2 do not use standard .4 nozzle.

Nothing but problems here...It is so soft the Ender 3 single-gear stock extruder would gouge it out and loose traction, resulting in several failed prints. I bought a sprite direct extruder and although it is better, it often fails to adhere to the bed in odd places, and even to adjacent layers. Another brand of filament (albeit different color) seems to work just fine with none of these problems. I will continue to experiment with settings to see if I can get a successful print with this material. Added Info: I ordered more yellow filament from a different brand, and had almost the same problem. Perhaps it is the pigments used to produce yellow which cause this finicky problem. I increased my nozzle temperature to near maximum, only reducing it slightly to prevent blobbing, and am getting passable results with both Comgrow and another brand. As a new maker, I am learning every day. I have increased my rating to 5 stars, as I now believe the problem may not be manufacturer-related I will avoid this color in the future . Thank you, Comgrow for the refund and excellent customer service.

Best color I’ve found for Eagle prints!

1-Star for the filament being wound too tightly on the spool. My AMS binds every time the filament is being drawn from the edge of the spool. It is wound too tightly, so I must manually unwind it whenever it reaches the edge. This may be a one-off issue with this spool. If so, I will update my review to 5-stars. But in the meantime, having to babysit the printer is a huge pain in the butt. Not cool. !!!Manufacturer note: Batch No. 1C82600670. If this is not a one-off issue, then please adjust the tensioner on your spool winder. PS: 5-Star for the filament itself. It prints great and adheres to the bed.

I had problems with this material. I used only the black one and clogged my 2 machines (Ender 3 s1 pro and my older ender 3). One of the machines has not been working since then. I changed the nozzle, however, it is still not working. It was a brand new hotend kit :(

En una Anycubic se pudo imprimir sin problemas siguiendo las especificaciones del vendedor

Llego en perfecto estado, pero el producto llego abierto, la etiqueta de sellado había sido retirada, pero supongo que fue por el el proceso de aduanas ya que fue un producto de importación, de todas formas al revisar el producto que es lo importante parece ser que todo está en orden y que los filamentos aún conservan su empaque al vacío, más adelante actualizare sobre el desempeño de los filamentos ya que no he tenido tiempo de probarlo

No me gusto que el material viniera como si lo hubiesen desenredado y vuelto a enrollar, a simple vista parece que se atorara en cualquier momento pero estoy imprimiendo sin problemas. Me gusto que la bolsa en que venia estuviera cerrada al vacio y en una caja de carton.

Se derrite a una temperatura menor, de lo contrario deja demasiados hilos.