PAD 7
Product ID: 540058085
Details
- BrandBIGTREETECH
- ColorBlack
- Display TypeLCD
- Item Weight0.8 Kilograms
- MaterialPCB
⚡2-5x faster printing speed
🔗Rich multi-interface connectivity
🔧Fully open-source & customizable firmware
Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to KSA.
🚀 Upgrade your 3D printing game with the PAD 7 — where speed meets smart customization!
The BIGTREETECH PAD 7 is a 7-inch open-source touchscreen smart controller preloaded with Klipper firmware, designed to dramatically increase 3D printing speed (2-5x faster) and quality. Compatible with popular FDM printers like BIQU B1 SE Plus, Voron 2.4, and Ender-3, it offers extensive connectivity options including USB, CANbus, and RJ45, plus audio output for a multimedia experience. Its modular design supports firmware customization and Raspberry Pi CM4 integration, making it a versatile upgrade for makers seeking precision, speed, and flexibility.
| ASIN | B0BC4CPDC3 |
| Adaptive Sync | FreeSync |
| Additional Features | Touchscreen |
| Aspect Ratio | 1.66:1 |
| Best Sellers Rank | #28,380 in Electronics ( See Top 100 in Electronics ) #815 in 3D Printer Accessories #1,008 in Computer Monitors |
| Brand | BIGTREETECH |
| Built-In Media | BIGTREETECH 5 inch HDMI Touch Screen |
| Color | Black |
| Compatible Devices | Raspberry Pi4, PI4B+CB1, BTT PI, Manta M8P+CB1, Manta M4P+CB1, Manta E3EZ+ CB1 |
| Connectivity Technology | HDMI |
| Contrast Ratio | 1000:1 |
| Customer Reviews | 4.2 out of 5 stars 34 Reviews |
| Display Resolution Maximum | 800x480 |
| Display Technology | LCD |
| Display Type | LCD |
| Hardware Connectivity | HDMI |
| Has Color Screen | Yes |
| Image Contrast Ratio | 1000:1 |
| Manufacturer | BIGTREETECH |
| Model Name | 5 inch HDMI Touch Screen Display |
| Model Number | KINGPRINTER-1040000034 |
| Mounting Type | Wall Mount |
| Native Resolution | 800 x 480 |
| Number of Component Outputs | 1 |
| Picture Quality Enhancement Technology | freesync |
| Pixel Pitch | 7.71 |
| Resolution | HD |
| Response Time | 5 seconds |
| Screen Finish | 160° |
| Screen Size | 5 Inches |
| Screen Surface Description | 160° |
| Total Number of HDMI Ports | 1 |
| Viewing Angle | 160 Degrees |
| Voltage | 5 Volts |
A**W
not bad at all
screen looked just fine but i ended up returning it because i went with the 7 inch instead
M**M
EXACTLY WHAT I NEEDED !
this is exactly what I needed for my RasPi setup. my partner had gotten me a small phone stand 3D printed to look like a nether portal. I thought it would look so sick as a monitor stand for my RasPi with the purple blocks as the background/screensaver. I needed a monitor that had a width of just under 3 inches to fit in the stand, have ports on the short end, and be less than a half inch thick. it fits SO PERFECTLY. the top bit of the frame hanging off is due to the thicker HDMI cord I have, which I plan to swap for a thinner one. so if you're looking for dimension specifics of the 5" monitor -- it is just shy of 3 inches on the short side, slightly less than 1/2 inch thick, and if you're techy enough to be getting a monitor this small you can do pythagoris from there to figure out the long side from a ~5" hypotenuse ;)
A**W
Works great out of the box with Pi3 and Pi4 on latest OS
I wanted a screen I could plug in with a wireless keyboard to quickly reconfigure otherwise-headless devices that might have misconfigured wifi or whatnot. Some screens require reconfiguration in config.txt or physical attachment to the Pi. Not this screen - it works perfectly out of the box with only a USB and HDMI connection to the Pi, and no OS reconfiguration. Looks great, touch is good, and it totally satisfies what I need!
K**R
Works fine. Have tiny fingers
Works fine
M**P
Works like it says happy
Got it for my Sovol s08 and it great I'm very happy with it
V**.
It's ok but causes issues
Would love to use it but my printer loses Wi-Fi if it's plugged in. Slightly better with a higher amperage going to my pi but still an issue.
K**T
Works awesome
Works awesome with the Sovol SV08 or any Klipper printer!
K**G
Worked great for my SV08
Good touch screen simply plugged in and it worked.
S**R
Awesome HDMI touch screen!
Great HDMI touch screen. Not just for 3d printers!!
J**N
Works fine.
My hdmi5 v1.1 display died after 2 years. This replacement is actually a v1.2 so the connections are not as pictured in this listing. Not complaining, just an FYI.
C**A
It sorta works
The HDMI provided wasn't working and same goes for the USB C cable. We had to use our own cable just to get it to work
Trustpilot
3 weeks ago
3 weeks ago