VEVOR 9U Wall Mount Network Server Cabinet, 15.5'' Deep, Server Rack Cabinet Enclosure, 200 lbs Max. Ground-Mounted Load Capacity, with Locking Glass Door Side Panels, for IT Equipment, A/V Devices

Installed my dozen raspberry pi5s in this with a PoE switch. Assembly was about 45 min. and has plenty of options how you want to set up the one shelf it comes with. the front door swings out fully and can be easily removed and has a grounding cable! Which is a plus and a code requirement, if you do this for an official business where NEC code must be met. Comes with heavy anchors adn lag bolts to mount on a wall. Fits all my servers, switches, power brick. Love it for quality + price I did modify mine and installed 3 PWM fans in its ceiling to force air through the top to improve cooling.

I bought this to replace another rack that came damaged. The other brand had low quality metal. You can see it bend easily by just touching. This one is way sturdier and better quality. The metal didn't bend at all. And the glass looked way nicer. There are just small things that should be better made. This rack Mount wasnt too hard to build but the locking mechanism fell apart. They have it pre installed on the other walls... But the front glass you have to install and it was so annoying. There are little springs and metal clips. I don't even know if I put it back together right. Also, the instructions are kind of bad. I mean it's easy but I found myself looking at the video. They don't match up by the way. And it's just not clear. Especially the grounding cable. Which fell apart also. The rack itself is sturdy. I bought two extra Shelves to fit my nvr and back up battery. It only comes with one. The mounting system wierd but it works. The additional shelves I bought fit in the rack system but only screw in from the front. Not the sides (like the included shelves). And Amazon doesn't sell that shelf. But they are sturdy. Also I highly recommend putting cardboard under it while assembling. The screws scratched the eff out of my table. Luckily I am buying a new one

The overall quality was very high, although there was a few large scratches and scuffs on the bottom panel on the inside. It's for sure able to be floor mounted, but it's a pity it doesn't come with casters or feet. The construction is very sturdy, and overall I really like this rack. I will say, you NEED A DRILL. The holes do NOT line up well WHATSOEVER. The drill will power through and pull it all into place. Once you do, you're left with an amazing homelab or server rack. I added lights around the glass for mine, since it's in my game room I figured I may as well make it match my computer.

I went from a rat’s nest to a sophisticated electrical showcase. Hahaha.. seriously, the unit was as advertised. For the price and quality, it’s well worth it. However, I did not hang my enclosure so I’m not sure if my ratings would change if I had to do so. Quick run down: 1. Directions are minimal but it’s logical (again, I did not hang it so there could be complications there) 2. There are a few pieces that will cut you so be careful when assembling. 3. If you opt to leave it on the floor, make sure you have a good pad under it as the screws beneath the enclosure will scratch your floor. 4. Good storage for about 6 items. I have a router, a few HD storage units and some other stuff. 5. Easy to route cords out the back but you may need to sand the wholes in the back to remove sharp edges. 6. Assembly took me about 45min after I laid my parts out. The other reviews are right when it comes to setting up the interior brackets. It’s tight BUT if you flip it on it’s side when installing them, you will not have any problems. It’s a great buy and my wife thanks me for finally making organizing that space. I would definitely recommend to a friend!

Overall the cabinet works for my needs as these are not client facing and are located already behind locked door rooms. The cabinets arrived bent and scratched in areas (I bent pieces that required it back into place by hand). The back panel doesn't have the screw holes punched out so it just pressure fits to the back and will come undone if you try to move it. The front lock doesn't really lock at all, I'm not sure how they think it is supposed to actually lock as there's no catch for it to rotate into. Watch assembly videos to go along with the very scant instructions for correct assemblage. Overall it looks nice and operates as a general cabinet to house all of your equipment.

This is a piece of junk. I thought this would be straightforward to install but it was ridiculous. 1. The instructions are unclear since they tried to make 1 set of instructions for 5 SKUs of the product. 2. The rails can't be installed properly because the holes were placed in the wrong areas. Now the shelves are skewed and not straight. 3. The front door lock couldn't be assembled because the screw is too small. The lock was also broken and doesn't work 4. The front door only has a top hinge and the bottom of the door is floating 5. The rear panel doesn't have holes to attach it to the frame on both sides. It now sways back and forth since it's not secured. I wanted to return it, but it looks like the seller doesn't offer free returns and I have to pay for this heavy monstrosity to be shipped back. I tried to contact Amazon to get a refund but they pointed me back to the seller. Ugh

The network cabinet is good quality, and the wall mounting plate is very convenient. The only complaint I have is the assembly manual which is misleading when it comes to the side panels direction but since it’s only 5 frames that need to be screwed together just use common sense and it will be assembled in 20 mins.

Item arrived in a timely fashion and seemingly well packed. The lock on the main door is not installed which makes zero sense as they don't take up anymore space installed and is a huge hassle to put back together when you try to install it and the tumbler falls apart. One of the plastic pressure clips on the side panel arrived broken. Currently getting the run around with Vevor customer service on this. Will update if that situation changes. Overall the cabinet is well built, however, there are a few issues such as the door arriving scuffed up, the inability to flip the door to the other side to swing the opposite direction, and the fact that the instructions are not only extremely unclear but downright dangerous as the cabinet only comes with expansion bolts used for installing in something solid like concrete. If you plan to mount this in your home on studs you'll need to go get proper lag bolts from the hardware store. The manual does not tell you this.

Nice rack, but unifi switch and nvrand dream machine wont fit nicely. A bit too narrow

Perfekt ist eigentlich für einen Server Schrank. Nutze es aber für mein Morion System. Preis Leistung Top würde es wieder kaufen

E' arrivato ben confezionato. L'ho subito montato e non ci sono state sorprese con i componenti. Per un buon montaggio meglio utilizzare un avvitatore a batteria. Al momento sono molto soddisfatto.

I love vevor, I have a vevor house, counters,small appliances,server racks, a nice column still and even a server battery! This server housing doesn't disappoint...

The build quality is pretty average. The biggest issue is that the screw holes and some of the connection points aren’t super precise, so things don’t always line up perfectly. During assembly I actually had to use a screwdriver and pliers to “persuade” a few parts into place and make the holes match up. It’s doable, but definitely not a smooth, plug-and-play install. Once it’s up, it does the job and holds equipment fine, but it doesn’t feel like a premium cabinet. Considering the price, I’d call it usable but not impressive.