HOMCOM Computer Desk PC Workstation with Drawer 152 x 60 x 88cm (BLACK)

Genuinely impressed with this desk. £89.99 is exceptionally priced for what you get. Honest review, Almost didn't buy this desk due to overwhelming negative reviews, so glad I took the chance. - Solid and sturdy desk I wouldn't trust my PC and Monitor on there if it wasn't (MSI 32" 1000r screen & Corsair 4000D glass/metal case) neither are these are light in weight. - Time to assemble took me 1 hour and 30 mins nothing more than a electric screwdriver and some common sense. - The instructions are just about readable due to very small print but a little common sense you could build it without instructions. - Delivery was perfect, delivered on the day expected, the tracking was provided day before as stated with a map and phone call to track delivery time and location. To address some of the poor feedback, the desk I received was numbered clearly for every panel and fixings bagged well with letters. Instructions can be read but its not as clear as it could be just print it a little bigger. All pre drilled holes are there for fitting *although they have been vinyl coated over after being drilled so just pop a screw driver bit through each hole before trying to put screws through it. Draw rails need to be separated (with a clip to do so) Desk - fit the outer edge rail to the desk with given holes Draw - line the rail along the most bottom edge and toward the back of the draw this you do need electric screwdriver for or drill with screwdriver bit in as no holes pre drilled for the draw itself *ensure the rail is fitted correct direction to insert into the desk rail, lines up great, opens and closes nicely. The vinyl coating does scratch easily while assembling so be careful if your on the floor to have a soft place to put down panels, well packaged in 2 separate boxes. Overall love the desk and price paid for it.

I have to start by saying I really like this desk. However it is very difficult to put together. I followed the instructions step by step but still had problems. Neither the instructions nor the pieces themselves are clearly labelled as to which way around they should be assembled. For example there is a piece that forms the bottom of the left pedestal. This piece has a rail fitted on the right side and then the vertical pieces which form the shelves are placed on the left and some feet are nailed into the bottom. However it wasn't clearly labelled which way up it should go so I assembled it upside down and then had to remove the feet which I had nailed into place leaving nail holes behind. Similarly, the instructions state that the two pedestals are to be joined together by a back piece and then the desktop put onto the top. Unfortunately this was not possible so the back piece had to be removed then the desktop attached and then the back piece re-attached otherwise the receptacles for the pins on the desktop would not align. It was a similar story with the drawer in the right pedestal. With the sides and the back of the pedestal screwed together as per the instructions, the drawer would not fit. I had to unscrew one side of the pedestal and then tighten up the screws again - but not too much otherwise the drawer would not move at all. That was the negatives, now the positives. The desk is huge!! There are smaller islands in the Caribbean! I exaggerate, of course, but you get the picture. There is plenty of shelf space although the shelves are only big enough for CD cases rather than the more modern DVD style cases that most physical games media come in nowadays. There is a shelf on the right pedestal large enough for most home printers (although, like me, you may have to turn it sideways to fit); along with a shelf underneath to store your paper and spare ink etc. Like many home desks there is no cable management to speak of, but since all the cables run at the back along the floor this isn't a problem. The desk is also very sturdy but surprisingly easy to move even "fully loaded" on a carpeted floor. All in all I would recommend this desk but with a warning about studying the instructions very carefully and being prepared to pull previously built bits apart in order to fit other parts.

Yes. I agree this is a very hard to assemble piece of furniture however the pre manufactured holes, institutions and numbered pieces and screws the process is easier. I suggest you build with 2 people, as I struggled on my own. The desk it's self is very aesthetically pleasing and the quality and strength is also very good. The desk arrived in two separate packages earlier than expected (which is always a good thing.) Thank you for this product, I highly recommend!

Parts of it were ok, but it was badly measured so it couldn’t form an actual desk. The screw holes were in places where some connecting piece meant the drawer would have to be upside down and pointing in the wrong direction to attach to the next piece, and it then wouldn’t attach the other way as the holes for it were now on the outside not the inside. If you plan on getting this you’ll need a drill, a measuring tape, chalk to mark, the patience of a saint, and not to have any young ears around to hear all the swearing. There is also no marking for which way up and which way round each piece goes, so you probably will need to take off each piece and put it back multiple times unless you get lucky. The instructions were also mostly useless, including the illustrations which seemed to be closer to vague suggestions than actual useful instructions. Not recommended. It would be easier, and probably a better product, to go to a lumber yard and make the desk yourself. It wouldn’t be any more difficult, and you’ll be doing the same amount of woodwork either way, which seems pretty par for the course for all the homcom products I seem to end up getting and then replacing due to terrible build quality and poor attention to detail.

The shelf side of this is OK and relatively easy to assemble, however the drawer side is absolutely rubbish, I've built a bit of flat pack in the past and these are the worst instructions ever, its just diagrams with no words, the parts are pre drilled,but these holes are not on the diagrams so difficult to know which way the parts fit.most of the parts are numbered,but not all, both sets of runners were not numbered and are both different. There are marker holes on the cabinet for the drawer runners,but not on the drawers so difficult to know how to fit them properly. The drawer does not fit square so final appearance looks rubbish.The drawer runners are not fit for purpose as the bearings keep getting stuck on the part that is meant to stop them sliding to far in, the desk has only being built a day and bearings are already falling out. I got this desk as a Christmas present for the wife, and its so rubbish I'm embarrassed to have bought it for her, in fact I will avoid buying any furniture from amazon again as a result of this desk.

Instructions for assembly were vague awould benefit from labelling pieces left/right, front and top to facilitate which way round to build. Took us more than 4 hours, a lot of patience and 2 attempts to build! However, once built this is a sturdy table and looks great. My son is really pleased. Good value for money and very functional.

So I'll start by saying the finished product is, more or less, what you see but the path to get there is an interesting one! Firstly, the package came 3 days early, which is normally a nice surprise but given that I'd planned to be at the premises on the due date and not that early, I wasn't impressed it was left on the doorstep and would've been there for 3 days had I not found someone to help me out! Then came the assembly. The items are really helpfully numbered by sticker which clears up any confusion as to what piece you need. The downside is the instructions are really lacking. They don't make it clear which way up items need to be and you need to flick ahead to work out where the securing holes need to be (top or bottom etc). On top of that, because the wrap has been added after the holes, one side on every piece had all the screw holes covered in vinyl which you need to pop before you can actually screw into. I get this may be by design and makes sense to hide the holes, but when assembling the drawer runners, the holes were so small you can't see them because they're covered meaning my drawer is now out of alignment. The desk is nice when finished and feels strong and sturdy which is why it regained a star for me. Definitely don't get this if you're expecting a quick and easy build, but if you've got a bit of willingness to overcome then it's a good product. Also - don't bother with the QR code to the video... it's 5 minutes of watching a bloke assemble this from a distance with absolutely no help whatsoever on how it's meant to fit (I bet the holes on the one he was using weren't covered up!).

Great desk, good value for money. Managed to put it all together myself (5ft 4", 50s). Only tricky bit was putting the top on and lining up the slots etc. Really solid an strong. Not bad for storage areas if you don't have a tonne of paperwork etc. Might be a good idea to get a drawer organiser though. Looks good too!