Modern Studio 10 Inch Platforma Low Profile Bed Frame/Mattress Foundation/Boxspring Optional/Wood slat support, Full, Black

I am so very impressed with the Zinus Platforma frame! It is very easy to put together. Just make sure you TAKE THE TIME TO LAY ALL THE PIECES AND SCREWS OUT CORRECTLY BEFORE YOU START. (If not, you will probably screw up.) The picture directions are self explanatory as you simply follow the numbers. The only thing that is not explained (and I'm not quite sure how it could be explained in a picture) is as the frame begins to take form and you are working at securing the top side rails to the end rail, be sure at the same time to also align the opposite end so it will slip over the top end bracket. Otherwise, when you get to it, there won't be any play left to slip it together because the opposite end is already stable. (Sorry if this sounds confusing.) I had to go back and loosen some of the screws in order to have enough play to do this. Another thing that impressed me is the way the slats are constructed and fit. They are thick and sturdy, and are connected together with one continuous strip of velcro correctly separating and spacing each slat. There is a ledge on the top side rails that is velcroed on which you simply lay the slats down and extend the velcro, and everything is correctly spaced. If anything looks out of wack, just go back and check to make sure each velco has been fully extended. The slats give a nice firm comfortable foundation for my mattress, even better than the box spring that came with the mattress. Originally I had purchsed the 6", but I felt like I was back in college sleeping with a mattress on the floor. The Zinus people were great to work with, and I exchanged it for the 10". The 10" without a box spring gives just about a normal mattress height...not too high or too low..., leaves enough room to store other things under if wanted, gives my 16 lb Havanese room to hide under the bed, and the bed's not so high that I worry about them hurting themselves jumping off if they decide not to use the ramp I made for them. Not only is the Zinus solidly built, it is also very good looking. At the moment, I am still using my old headboard, that I just leaned against the wall after attaching 2 felt squares to protect the wall. Seems to be staying put well. There is no way to screw it to the frame, although I am sure you could improvise somehow if wanted. Some month previously, I had purchased a less expensive 14" metal frame from Walmart. Rather than having one slat across, they had 2, which ended up pushing the mattress right up against my spine, making my entire body hurt. Also, the slats kept falling off the frame, and in the end the legs of the frame bent because they were not made strongly enough. It was a disaster! Needless to say, I returned it. Zinus told me that their beds are designed in the US, and made in China. If their frames are any indication of the quality of their mattresses, I will buy their mattress next time I need one.

A-MAZING. - Slotted together WAY faster than I thought. I'd set aside an entire DAY for something that took maybe half an hour. We spent longer re-arranging the room!! - The pieces were labelled with the step number, but they were NOT labelled with their part number, even though the instructions gave them one. This was easily solved by sitting down with some masking tape and a pen and labelling them myself. It felt a little bit like the instructions had been altered without altering the packaging for the parts yet, so maybe that will improve and I just had a transitional version of the item. LIke I said, sit down with some masking tape and a pen and label the parts your self, and it will be just fine. The little inventory diagrams even have red check marks that tell you where holes are on the part, which makes IDing them SO much easier during the inventorying stage of assembly! - This thing is VERY LIGHT and easy to move. My husband and I have moderately impaired mobility and we were able to lift and move this very easily. KEEP YOUR TOES CLEAR it's so easy to forget this is a BOX not something with legs. I set it down on my bare toe for a second and OUCH. Those corners are definitely 90 degrees! - It comes with extra parts that are LABELLED 'extra parts'! Amazing! - The bed slats are in two parts, making them easy to manipulate (and carry up the stairs), AND they VELCRO onto the bedframe! They also have nonskid stickers and additional nonskid parts to help the mattress not slid off! This thing is SO well designed!!! - THE RATCHET. You know how most put-together furniture comes with a dinky lil L-shaped allen wrench? That's not good enough for Zinus, no sir. They give you a dang RATCHET allen wrench. It's so FANCY. I love it. I kept mine, it's a 3/16" and it's AWESOME. I hope I need to use it for my IKEA furniture because RATCHET. Saved my hands a lot of pain. - THEY DON'T USE STYROFOAM. NO SQUEAKY NAILS-ON-CHALKBOARD NOISE AND NO MESS. My husband and I H A T E the sound and feel of styrofoam, and apparently someone in Zinus' shipping dept does too because they use the really nice stuff. I mean it we just... saved it, for crafting. It's really great stuff, very dense, very sturdy, very quiet. - They give you three (3) little notecards??? One is a thank you card and two say 'hello' on them. They come with an envelope that has a tiny Zinus logo and are in a little paper sleeve that has a thank you message from the company, that urges you to 'recycle' the cards (they have nothing in them so I hesitate to say they're recycled because to me they just seemed brand new??). It was super cute and the two 'hello' cards are a perfect gift for me since I just moved and have been needing a couple little cards to send as change of address cards. I super love this company! We started off buying their mattresses but now I am very excited. I'm not a brand loyal kind of person but I am definitely building my trust with this brand and will look first at their offerings when I'm in the market for this type of thing in future because I know the quality on offer. I wish they made loft beds!!

Happy with my purchase. Bought the 18" full size frame (on sale) for the under bed storage but I also liked the minimal modern design. As an apartment renter, I know I'll move at some point or another so didn't want a very heavy bulky frame, so also a pro that this disassembles and flat-packs easily. Initial impressions - impressed with box size and efficiency of packing. I was able to carry the ~47 lb box up one flight of stairs myself without much trouble. Assembly by myself was easy. Package has minimal padding, using some soft foam pieces (appreciated no styrofoam!) and each metal piece in a plastic sleeve. Many had broken through their plastic sleeves, but everything was in great condition/no scratches. It's one of the rare times where I thought a product could actually use a hair more packing material - but again, there was no damage. As I started to assemble, none of my pieces were labeled (except screws) but it was fairly easy to identify and follow the printed instructions. As another reviewer suggested, open the box lengthwise, assemble, then add screws (frame will hold basic shape), and do final tightening of screws for each step once all are in to ensure everything aligns. Unfortunately one bottom corner of the lengthwise side bars (piece "B") had a screw hole on the wrong side (outer instead of inner) which put a dampener on my set-up as I worried about overall quality control. Confirmed it was manufacturer error and not my own. However it seemed to hold just fine and was in the room corner (not getting on the bed on that side)... I macgyvered with some duct tape for now to ensure it stays in place and reached out to support. (More comments on this below). The rest of assembly went fast. About 50% of screw holes were super smooth and easy, the other 50% took a little time to get the screw to thread correctly but then went in fine once started. I found it best to start all by hand then tighten with the provided ratchet. Unlike IKEA assembly, the screws seem good quality and I had zero issue with any getting stripped - and think I'll be able to disassemble/reassemble as needed without issue. Some reviews mentioned that they were given extra screws - mine did not. The slats laid out fast and connect to the edges with velcro - I took the time to press down on the entire strip. I added the provided tiny rubber strips on frame edges to reduce mattress shifting, but held off on using the slat stickers (I rotate my mattress regularly so don't plan to use). Once I added my mattress, the slats (and Velcro) settled some as I laid down for the first few times, but no noise from the frame, and no issues with mattress shifting. After a couple weeks of use, I'm very happy. The frame and slats have no noise, seems strong, and I've had no issues with the mattress shifting. Only if I put a lot of weight into one spot will I occasionally get a tiny bit of noise from the Velcro - i.e. crawling across the bed - and not every time, never loud enough to bother me, or really notice unless listening for it, and it's been less and less as the Velcro connections tighten. I also find that this new frame gives more mattress support - I didn't realize my prior frame had a little too much give until now, thinking it was my mattress. Love the under bed storage capacity, especially for an apartment. The frame looks great even in a smaller room, despite the height. Regarding the piece with incorrect screw hole - I reached out to Zinus (as Amazon instructs for broken/missing pieces). Initially they said I'd have to speak to Amazon and return/replace because I was still in the return window. When I clarified that I just needed/wanted a replacement piece and wanted to otherwise keep my order, they escalated my request to upper support, and should be shipping the new piece soon. I'll update if any issues with this.

I have had this bedframe for over 3 years now and it is fantastic. Sturdy, low to the ground, comfortable, and adds just enough support where you can rest comfortably throughout the night. When I received it, it was super easy to put together and all the materials were conveniently labeled with easy to understand instructions. The parts included also were very nice quality. This is not a foldable bedframe, and though you could take it back apart I find the thinness of it due to short height makes it easy to store as is. Another perk, I love the anti slip pads that came with it. The mattress would stay in place overnight with even the most restless of sleepers, or during intimate time. Over time, the support boards did unfortunately develop a squeak to them with certain movements which is my only complaint.

I received this product in fairly good condition. The packaging was fine, nothing was bent or missing, and the included hardware and tools to put the bed frame together are sufficient to get the job done. Opening the packaging, everything is plastic wrapped and pretty well protected so that you don't accidentally scratch any of the pieces. There are included instructions which are pretty easy to follow, essentially just match up the numbers on one part to the numbers on another part and screw the two pieces together. This entire process took me maybe 20 - 30 minutes to do by myself and I was taking my time with it. If two people were to put this together, it would probably only take about 15 minutes. Once put together, I was surprised by just how sturdy the frame seemed to be. It is well made and the welds on the pieces seem to be fine. As others have mentioned, the center supports seem to be the only area where some additional reinforcement could be needed, but so long as you set the bed in the spot you intend to keep it and don't drag it around on the floor too much, the center supports are sufficient in my opinion. The bed frame or platform, whatever you want to call it, is also the perfect size for the queen mattress I bought for it. I had seen reviews on other bed frames where some mattresses were too big or too small so the fact this was a non-issue was nice. Another big plus for me is that there is no rattling or squeaking. The bed frame looks great while providing a nice base for my mattress to be supported on. I suppose the only con to this bed frame is the lack of storage volume underneath the frame itself in case someone were to want to store things underneath it. You can definitely fit things that aren't too tall underneath but if you're someone that likes to have a lot of under bed storage, then this bed frame probably isn't the one for you. I wouldn't really call this a con however seeing as it is listed as being only a 6 inch tall platform, so there you go. All in all, 10/10 from me. It met all my expectations and ended up being a much better product than I anticipated and I would highly recommend it to people that want a low profile, budget friendly bed frame option that looks good and is functional.

Update Aug '24: This is just a guest bed at my house so doesn't get daily use, but it's held up very well. I often lift the mattress to refresh the bedding or get something underneath and yet the sticky tapes that help the mattress stay in place are still doing their job. It's been a year or two and still no squeaks and no issues (but keep in mind it's seldomly used at my house). I'm very happy with this purchase and considering the price I wouldn't hesitate to get myself this frame for daily use if I was in bed of a bed frame again. Only challenge I've had with it has been to find a bed skirt that fits it properly... All the skirts seam to have a longer pleat than I need. The ones with the correct length tend to be more expensive for some reason. This isn't a big deal, I like the minimalistic look of the frame by itself, but since my guest room is also my storage room, it would be nice to hide all the boxes of junk underneath the bed lol. Original: Since I just put my bed together today, I can't speak on durability, and considering it's a metal bed frame, I'm sure time will bring about a few squeaks in the future, HOWEVER it did feel very sturdy and like all the parts "hug" each other well when put together. The metal felt strong and the slats feel durable too. VERY easy to assemble with simple instructions and organized packaging. Literally the hardest thing about this was opening the box. As simple as it is, this was very well-designed product and the company really did an amazing job in everything from it's design, the product quality, how is packaged, and even the instructions. I do wish I had bought the tallest size just because I could take advantage of the under-bed space for storage (I got the 10" height since in the photos the 14" looked exaggeratedly high), but I'm happy with how good the 10" looks (personally I think anything less would look way too low). I'm lucky I went with this bed frame over all the others I considered.... I highly recommend this, especially considering the price. Thank you!

I wanted a low-platform bed because I don't really like the bulkiness of regular bed frames and this was the perfect choice. I didn't want my matress on the floor and this frame is sleek and pleasing to the eye, I love the minimalist look to it. It's simplicity flows with my room so it's perfect! Delivery was pretty fast and the package was easy to open. Assembly was awesome in all honesty. I am a five feet 20 year old femme who loves to put together furniture and I found the instructions easy to follow and straight to the point. There's no words only diagrams like IKEA instructions. The package came with tools to assemble the bed and it all came together in like a big professional Ziploc bag along with the packet of tools and screws and a little book that tells you other bedroom items, such as a nightstand etc., that go along with this design. It took me like thirty minutes to assemble the whole thing and on my own. Great plus: wooden bed slates are attached to the bed frame with Velcro which is dope because I've had wooden slats before fall in the middle of the night leaving me sleeping in a little hole or nearly on the floor. The Ziploc packet of assembly goodies also comes with a velro strip that you can put on the slats if you want so that when you place your matress it is not moving all over the place. I didn't feel the need to but i thought it was a very thoughtful thing to include. You don't need a mattress box for this bed so it's wonderful. All in all, I live the bed and it is well worth the price. The assembly was quick and direct and delivery was fast, arriving earlier than I expected so that was great. 10/10 would recommend. Bless.

I always think the best reviews are the ones written long after the purchase. I was just submitting an enthusiastic review of this platform bed frame to wirecuttter, as it was overlooked in their recent article. So this metal bed frame has been assembled, disassembled, reassembled, multiple times and is easy enough to do. It survived the Palisades fire last year despite heavy smoke damage and loss of the mattress etc. It could be safely cleaned unlike other items. While it can be off if your floor is not level, it is easy enough to fix. For the price, this is something I really couldn’t be happier with.

We have one of these in our main bedroom which is several years old. It was time to get new singles for our guest room. They can be pushed together to make a king - with a couple of zip ties they stay well too. They are so great that I looked for these specifically. Glad to see they have not changed! A very good solid and functional product!

Let's get this out of the way, I love the design of this bed frame. End of story. But there is more to why I chose this over other "similar-looking" products from Zinus. Steel beams are prone to sagging after long usage, especially when you sit up in the morning on the side of the bed. This, obviously, is not ideal. So, because this bed has support for the upper frame in the middle of the beams on the side, I think sagging would not be as prominent as it otherwise would have been. Wooden beds does look classy, but they are heavy as hell. Compared to the steel beams on the zinus bed, which are steel super heavy (see what I did there?), it is much easier to disassemble when I move. I wish the corners of the support legs were more rounded off, but they are not sharp enough to be a problem for now. I did not use the sticky tape to secure the mattress because I need to lift the mattress up while putting the fitted sheet on. nonetheless, the mattress does not slide around. I cannot say if the mattress would slide around, were you to participate in "bed-related physical activities", but I am more than happy to test that out one day. And when that day comes, I will let you know for certain. Quality control was excellent, nuts and bolts fitted in effortlessly for the most part. I like the fact that no tools at all is needed for the assembly. Assembly was very intuitive, but a guide is there if you need one. They advertise the assembly is under 5 minutes. I guess I am a dummy, or something in that neighbourhood, but it took me almost 45 minutes putting the thing together by myself. The final product looks minimalistic, and performs well. No groaning from the steel or the joints. No sounds when I roll around on the mattress, but again, I have not done any physical activities on the bed, so I cannot attest to that. To conclude, solid purchase. There is this envelope included saying I should send a thank you note to other people upon purchase of this bed frame. Could someone elaborate? I bought this bed as a bachelor, who should I thank? Myself? my employer for paying me for my time spent at the office? my parents for raising me right so that I could be independent, get a job to pay for the bed? I do the last one all the time, but not too sure about the former 2 though. Would recommend buying this bed frame from zinus. Will update if s*** happens.

I waited long till the twin narrow size is available, and I am so glad to get one. The frame is of great, sturdy quality. The slats and the attachment on the frame is good and does not slide out of place nor make unusual noises. The height is perfect storage for luggage bags. It came with some spare parts and has a nut screw driver so you don't need to have anything else. I was able to assemble it in about 20-30 mins. I recommend this bed frame. I like the soft wooden slats vs the other bed frame version with metal slats. This is way better and comfortable!

Very good. Bought another zinus frame before..happy with both. Easy assembly.

I bought 2 because I want to make a L shape sofa for day and guest or grandchildren beds when necessary