ZtotopCases 2 Pack Screen Protector for Galaxy Tab S10 Plus 12.4''/S9 FE Plus 5G/S9 Plus/S7 FE/S8 Plus/S7 Plus, 9H High Definition/S Pen Compatible Tempered Glass for Samsung Tablet S10+S9 FE+S8+

I recently purchased this screen protector, and it has been a great addition to my device. It fits perfectly on the screen and was easy to apply without any bubbles, which made the installation process quick and stress-free.

Great product, fits perfectly, easy directions

The screen protector arrived very fast and everything needed for instalation was included. The screen protector is sturdy in it's thickness but didn't interfere at all with both of my Spiegen cases. I did have to use a credit card to make sure the edges of the applied screen protector were properly under the lip of the Spiegen case, otherwise after putting the case on with the applied screen protector it will have bubbles. If this happens it is because the case is not properly covering the edges, so just slide a plastic card (I used a credit card) under the lip of the case to make sure the screen protector is covered. After this I had no bubbles. A hint to the meticulous: apply the screen protector in the bathroom area after running the hot shower as the steam will take the dust particles out of the air. These dust partcles are what frustrate the application process for if dust gets either on the tablet or the screen adhesive side when applying it, then you will have air bubbles. Another hint is I actually used the case I have for my Samsung tab S8+ as the guide for applying the screen protector (instead of the guide stickers for the hinges). This worked better for me as the case leaves no room for misalignment and guides the screen protector perfectly in the application. The guide stickers (in my past experience with large tablets) are not perfect and I noticed always a milimeter off on one side that actually is noticeable after the application and then one has to lift and reapply to get it perfectly aligned. I'm very satified with this screen protectors so far, and above all can assure that it works with the Spiegen cases.

I miss the anti glare but saw some people getting scratches on these tablets extremely easy. At that point I decided I rather have peace of mind then anti glare . Works pretty good . First install it did catch a few air bubbles , one down by the corner. Not sure why . But it will do until I need to replace it , dont want to waste the other one just for the perfect install. As long as my screen is safe .

I purchased this for a Galaxy S7+ Tablet. I have installed many screen protectors over the years, but never one this large. I am happy to say I was able to get a perfect install with no dust or bubbles.Some tips :1) Wear rubber gloves if you have them... this will keep fingerprints off of the edges.2) Clean the tablet surface well with wipes. I did a second pass with lint free pec pads and an alcohol cleaning fluid meant for camera lenses3) Clean the surface of the screen protector sticker so it does not transfer anything to the device4) Position the protector using scotch tape along one of the long sides of the tablet... use at least 3 strips to prevent movement after it is positioned perfectly. It will slide around easily, so just be patient and check all four corners and the camera notch are positioned well.5) Before peeling, blow off any dust off the tablet and screen protector (i used a rocket blower)6) Peel backing sticker, and quickly but carefully "close the door". I apply light pressure from the middle out. I has one stubborn bubble that i worked out with gentle pressure, working it to the closest edge.After installing, I see no rainbow effect, and the touch and pen functionality work fine. It takes patience to install a protector this large, but just go slow, double check for dust and cross your fingers!

I have a Galaxy Tab S7+, this was very easy to install, I didn't even have to use the included tabs. Wash your hands, thoroughly clean the screen, carefully pull plastic film off of glass. Remove any dust (if any) from sticky side of glass. Hover the glass above tablet screen while holding it only by the edges with your fingertips. Line it up, gently set it down. Be sure the camera notch goes where it's supposed to. Wait a few minutes for it to settle, then push out the air bubbles. Gently apply downward pressure across the entirety of the glass, to ensure that it fully sticks. Done!Fingerprint sensor works the same, I have no issues unlocking. If you can't unlock after installing the glass, remove your fingerprints and re-add them.Touch sensitivity is good too, I'm not seeing a difference. I play alot of games like Call Of Duty Mobile, so it's important that the screen remain responsive to touch. This is why I chose this tempered glass over others, they are a bit too thick and noticeably reduce responsiveness.This glass covers 99.9% of the screen (everywhere that matters). Even with my Supcase Unicorn Beetle Pro on the tablet, there is no conflict with the glass.I mainly bought this glass to prevent scratches to the real screen, not so much to prevent damage from impacts. It doesn't matter what tempered glass you buy, NONE of them will save your device's screen if the impact is hard enough. Trust me, I know from experience!I would say this is a good deal for the price. Worth the money.

Excellent product

Kit with two screen protectors for a Galaxy Tab S9+ (12.4 in. display.) Includes wipes and prep items for installation. The protector is a precise fit for the S9+, but it takes some care to get the protector aligned properly. I did a thorough cleaning of the screen, then partially removed the film from the "back" side of the glass, aligned he corners and then the sides while keeping half of the film on the back to make sure the cutout for the camera was aligned before removing the remaining film. Used the squeegee tool to get the last of the bubbles out and then to make sure it was fully adhered. Got it right the first time, so I have an extra protector, but having two is not a terrible idea since even a small dust particle could ruin an installation.

The screen protector arrived very fast and everything needed for instalation was included. The screen protector is sturdy in it's thickness but didn't interfere at all with both of my Spiegen cases. I did have to use a credit card to make sure the edges of the applied screen protector were properly under the lip of the Spiegen case, otherwise after putting the case on with the applied screen protector it will have bubbles. If this happens it is because the case is not properly covering the edges, so just slide a plastic card (I used a credit card) under the lip of the case to make sure the screen protector is covered. After this I had no bubbles.A hint to the meticulous: apply the screen protector in the bathroom area after running the hot shower as the steam will take the dust particles out of the air. These dust partcles are what frustrate the application process for if dust gets either on the tablet or the screen adhesive side when applying it, then you will have air bubbles. Another hint is I actually used the case I have for my Samsung tab S8+ as the guide for applying the screen protector (instead of the guide stickers for the hinges). This worked better for me as the case leaves no room for misalignment and guides the screen protector perfectly in the application. The guide stickers (in my past experience with large tablets) are not perfect and I noticed always a milimeter off on one side that actually is noticeable after the application and then one has to lift and reapply to get it perfectly aligned.I'm very satified with this screen protectors so far, and above all can assure that it works with the Spiegen cases.

Great Product

E adatto per il tab s11 ultra 14.6 pollici, leggero , temperato, s installa comodamente, c'e' anchevun bidro

Good protection.

Fits perfect, easy and clear instructions to follow, although I didn't use the hinge stickers, it seemed like an extra step i didn't need. Fits perfectly, so far it works good with my s-pen.