AX210NGW DTK WiFi Card WiFi 6E Supports 6GHz, 2230, 2x2 AX+BT 5.3+Tri-Band, Includes RF Cable (11 inch), 5dBi High Gain Antennas and Low-Profile Brackets

Easy setup. Works great. Good price. Better choice over those that just plug in externally.

I replaced an old Dell WiFi/Bluetooth card. This one was easy to install and worked right away. It is also an upgrade that adds 5g capabilities. Drivers were a breeze to install too. So far everything works fine and I hope it will continue to do so.

It was easy to install. I did have to go to Intel’s website to download the drivers. Win11’s driver did not work well. After installing the Intel version, it worked just fine. The speed is also good and connected to my home router with no issue.

This kit is PERFECT for adding WiFi (and BlueTooth) to my refurbished Dell OptiPlex 7060 computers. I have three (3) in the SFF (Small Form Factor mid-sized case) that were traded in by some corporate fleet. None of them had WiFi, which is the norm for corporate installations. I was able to find WiFi installation demonstrations on YouTube; the process is very straightforward. The price is excellent. Compare this COMPLETE KIT to the cost of buying the AX210 card PLUS an antenna kit. This is THE ONE TO BUY...for multiple reasons This kit is a very complete, well-thought-out product that includes EVERYTHING you need. The troublesome antenna-wire connections are already attached to the industry-standard Intel AX210 WiFi card. The kit includes full-height and half-height back plates, but my computers have knockouts that are sized perfectly for the antenna hardware to pass through the case. The antenna mounting hardware is first-rate, as are the antennas. Very importantly in my case, the kit includes the TINY SCREW that affixes the AX210 card to the little metal riser (post) that holds the card in proper relation to its motherboard slot. My computers were sold originally without any WiFi card, so they had no screw, either. Thanks to this very intelligent product/kit, I was not left stranded by the lack of that screw. OUTSTANDING! The kit even includes a little phillips-head screwdriver. I found it impossible to use it though, because the screw is so tiny. Had to break out my tiny precision screwdrivers, which are MAGNETIZED. The magnetization enabled placing that screw EXACTLY where it needed to be.

This wifi card works great!!! After using for 11 days now, there are no issues. The wifi, using WiFi 6E, works well and i’m getting up to 1200 mbps download speed. My upload speed is lower, not because of the card, but because my ISP doesn’t offer symmetrical speeds. The bluetooth also works well. Passkeys also work, that’s another reason why I got it as some accounts on my PC it’s easier for me to scan the QR code with my phone and login with the passkey (bluetooth needed for the QR code). I only removed a star because of the install process, I see that some people had issues and to the normal person it might be hard, but again it’s relatively easy. It comes with the card and the wires connected (it’s okay if the wire clips off from the card, it’s not broken, just clip it back on and it’s fine, doesn’t matter which one goes to which). If you want to use it in the pcie slot cover, you just have to take the washers off and put the golden parts through the holes and screw the washers on the other side. Then you put it in the slot and connect it to your motherboard and put the antennas on and you’re good to go, no drivers needed. Overall, really happy with the purchase and I will probably buy another one soon as my brother needs one for his computer!

Works great, easy to install. The directions were helpful, it only took a few minutes to install and then download the software. Once in I was able to immediately connect to my WIFI network. The connection is good and reliable.

My first go with an M.2 installed peripheral and it was super simple! Windows 11 detected it and even installed/upgraded the drivers to the most recent versions. I installed this on a Dell Optiplex using the provided holes for the antennas in the case. This required threading the studs a little to ensure they would insert all the way, but after that it was super simple. The nuts are 10mm I believe, so if you have a deep socket or a 10mm wrench you'll be able to tighten the antenna studs. The card came with 2 screws, obviously only needing one to secure the card, which was perfect! I REALLY appreciated that, as well as a small screwdriver and a bracket, which I have no idea what that was intended for. It also includes a full and half height bracket, and a case screw to secure either one of those if used. I didn't for my install. I'll submit an update to my review with the performance of the Bluetooth. The Wi-Fi works perfectly, although I'm less than 20' away from the access point. My signal is strong. I haven't streamed much yet, but there have been no issues with the content I did stream. It wasn't 4K as I don't have a 4K setup. If you're using Windows 10 and use this card, the drivers are not the latest and greatest on the disc. You may have to use Windows Update to download them. If you're using Windows 11 and you have the latest updates to the OS, don't use the disc. Again, what comes in the box is a complete solution for anyone adding Wi-Fi or Bluetooth to their computer. If you're mounting the antennas to the case via an default location on the case, you need nothing. If you're mounting the antennas on a bracket, they provide the brackets. The studs are already connected to the M.2 card. They provide all the screws you may need, even one of the tools you may need. It was worth the money for saving all the hassle I might have encountered had it not come with everything. A great purchase.

I bought this to try in one workstation to verify it was a good product to stock and use in my IT services & repair shop. The product came in a small cardboard box that included a ziplocked static bag with the card and antenna wires already attached. I chose the small form factor rear plate and tightened the antenna posts to it. Unfortunately, the antennas themselves were not included. I looked around my computer shop and found two antennas we scrapped from an old router and successfully used them. The product was giving me a good impression before I noticed the missing antennas. I mean, the wifi card included a little steel tab to lock the wires onto the M.2 card! Also they included a little Phillips head screwdriver and a case screw to use on either of the rear antenna plates (full size or small form factor). These two things deserve bonus points. Testing with my own antennas resulted in good connection and speed test results. Intel drivers were automatically installed in Windows 10, though I was already connected via ethernet cable. The included mini-CD must contains drivers... perhaps that will help those who still have an optical drive. I'd like to change my review to a positive one. If the manufacturer sees this review and makes it right, I'll revise the review. To be fair, no product is immune from the occasional assembly line mishap. Let's see how support does - that's the real test of a company, is it not?

AMD5600X CPUにて環境構築しましたが問題なく動作しました。 ディスクのドライバよりintelチップ名を検索し最新版を入れましょう TPLinkのUSB Wifi6e子機を使用していましたがM.2 WIFIの方が圧倒的に安定していますね 有線環境が整えられない格ゲーマーには必須だと思います

working fine.

一度PCを組んでからの増設になります。 マザーボードはB760 Pro RS/D4です。他のレビューの方もいたので参考になりました。 取り付けは非常に簡単でした。取り付けてから少し時間が経つと、Wi-FiとBluetoothのドライバーがインストールされるのが、デバイスマネージャーを見ると確認ができました。 取り付けてから今まで、一度だけWi-Fiのマークが消えた事がありましたが、Windows UpdateによるものでPCを再起動したら改善されました。 今までUSB子機タイプを使用していましたが、頻繁に接続が途切れてストレスになっていました。 今回のWi-Fi LAN カードにしてからは満足しています。ただルーターがacまでの対応なので、axの接続スピードが出るか確認できないのが残念です。 Bluetoothは一度も不具合なく使えています。ANKERとSONYのイヤホンです。

この手のパーツを取り扱うのは初めてでしたが、特にトラブルなく簡単に取り付けられた。 取り付けてから1年程度経ったが、Wi-Fi・Bluetoothともに問題なく動作していて満足しているので☆5です。

使用マザーボード:ASUS TUF GAMING B550-PLUS (B550 AM4 ATX) M.2スロット(キーE)※公式サイトだと21番の箇所 ドライバーインストールが必要とありますが使用せず使えました。 注意 インストール必要な方はディスクドライブを用意してください。 取り付けは少し大変です。頑張ってください。