Metra 95-5817 Double DIN Installation Dash Kit for Select 1995-2008 Ford, Lincoln, Mercury, and Mazda Vehicles | Aftermarket stereo installation trim, mounts your new head unit in the factory opening, clean OEM-look radio upgrade

Fits as advertised, easy to install and gives solid support to my boss dvd stereo

Quedo a la perfección y hacen que stereo no se mueve y se vea como si fuera el que vine con la camioneta ford sport trac 2001, y me gustaría que agregarán los tornillos para sostener las base con el stereo auque no fue muy difícil conseguirlo y una vez que esta todo fue muy rapido

works great and super easy to install and looks amazing it fit my 99 ford explorer limited 5.0L V8 with no issues at all. it is made with high quality polymer and seems to be really durable. this is amazing value for the money and what it would cost you to have someone else install the radio for you.

I used this as the base adapter to install a double din radio in a 2009 crown victoria. The crown vic was not really designed to accept a double din radio but it can be done. The stock adapter puts the radio too far back in the opening, the radio actually comes in contact with the defroster duct and prevents the adapter from locking in. Wanting to keep my defroster duct intact, I slotted the required mounting holes a 1/2 an inch longer and cut off the dash matching trim area. This allowed me to bring the unit forward a half an inch allowing the unit to snap into the dashboard properly. Be forewarned, once the radio is snapped in, the entire dash plate has to come out to remove the radio. The radio now sits 1/4 inch back from flush with the dash. The radio came with a trim bezel that I trimmed to fit the opening and the radio looks like a factory install. Note: You have to trim the top and bottom of the radio opening flush with the bezel and trim a little of the sides, but not too much. The sides are where the adapter locks into the opening. All in all, it took about 20 minutes to modify the adapter once I got done figuring out the right depth to clear the wiring harness and leave an air gap for cooling the unit. I had to order a second one for my neighbor who owns a 03 crown vic who now wants one installed in his car. If your not scared of a little dremel work, this is an easy way to add a double din to an 03-11 crown vic. It will not work on a 02 or older unless you really modify the defroster duct. I would recommend this kit to anyone who wants to put a double din in an 03 or later crown vic. But some planning and dremel work is required to get it right. I forgot to mention that once you make this modification, the factory radio will not lock into the dash. You will need a new dash bezel to put the stock radio back in.

Le quedó genial al estéreo Pioneer y se ajustó perfectamente a mi camioneta Ford Escape 2007