J-B Weld PlasticWeld Epoxy Stick

I've used this J-B Weld PlasticWeld epoxy putty a few times around the house, and it holds up pretty nicely. it's handy for repairing my plastic garden tools and small cracks in the kayak. the application is easy, and it dries pretty quickly. glad i have it in my toolbox for quick fixes during projects or while camping 🛠️. definitely a good addition to my repair supplies!

Fantastic product if you know how to use it properly. Cures extremely hard and bonds to plastic well. Its a little messy to use, but it is manageable when using gloves. I used it to fix my car's wind deflector which shattered into several pieces, some of which were missing. After sanding and painting, I tlreally cant tell the difference between the putty and the original parts. Its a bit overpriced for such a small amount, but it did what I needed it to do.

It works well, used it to repair a crack in a plastic bathtub. So far it is holding up well and there is no leaks for the repaired are. Make sure you sand and clean the area to be repaired well, this is to ensure proper adhesion. The only bad thing was the smell, it was so strong, even with the exhaust fan running, I had to leave the area a few times to catch my breath. Good product and works like it says.

Works good. The directions say it dries in 5 minutes (if I remember correctly). Sure, its not as smooth, but definitely not dry. It takes a long time to dry, like several hours to fully set. However, that was an advantage for what I was using it on; it allowed me to wipe the excess off the plastic outside of the crack I was filling in. No residue or anything left behind. Just a filled in crack! It doesn't dry as white, its more of a gray. And now a month later, it has a tad bit of a purple hue. Not sure if it did that on its own, or from being outside and exposed to all kinds of stuff. Plan on some paint if you want it to stay white. I should also mention, fresh from the tube it smells kind of like rotten eggs, though. Not strong, but you can definitely smell it.

Had a very large, multi-day 3d print fail on me. I was able to print the missing portion but needed to bond the two areas together. because of the large area I needed something with decent working time that would hold over a surprisingly small actual contact area. This was exactly what I needed. so pros: 1) allowed me to fill in the infill at the contact area to create more surface area for the bond. 2) easy to work with after i got a method down (I recommend a test round on something if it's your first time using it before moving onto your project so you get a feel for it) 3) shapeable both during application and after to help smooth out the shame of your failures 4) surprisingly strong. I needed the bond to hold about a kilo of weight, and after some testing that appears to be more than easy for this. 5) probably the longest working time out of the alternatives for what I was trying to do. (i.e. CA glue, plastic cement... etc) Cons: 1) just a touch less working time then I would have hoped for. it said 25 minutes, but started to get hard to work with around 15 minutes. Again, WAY more than my other options, but it did lead to extra post processing work I would have liked to avoid. 2) it's a touch harder once cured than the plastic around it, so when sanding it I was tending to take away more of the base material than than the epoxy, but i sort of expected this going into it. Until I find a better option for this specific use case, this will remain my top choice.

3.5 stars for potential. The idea of a putty appealed to me instead of using Bondo which is messy and stinky. My garbage men continuously break my expensive yard waste bins. I thought I would give this a go in rebonding them. It was easy to use and it held up for a while but The fact that the bins are being hastily thrown it only lasted about a month. I do think this product would work great for the right project. This just wasn't one of them. Would try it again on something different in the future for sure.

Ease to use and short curing time to finish the job quickly. Secures when applied. Highly recommend for any plastic repair.

I accidentally pushed a bamboo pole through the side of a very large 20” resin flower pot. I was not about to replace it considering the cost was going to be over $50. I looked around and came across this JB Weld for plastic. I’d heard about JB Weld from my husband and sons for years but not anything specific so I decided on this product in particular because of what they said. They’re all handy and are willing to fix anything before buying new so I figured I might as well give it a try. The main break in the pot was about 10” long and jagged with another 5” break coming off of the main break. I completely rough sanded the interior of the pot so the weld would have a rough area to attach to on both sides of the break. I followed the directions and completely mixed the substance together wearing rubber gloves. I rolled it out like Plato like I did with my kids. I placed it on the crack and pushed and feathered it out about an inch in total across. I repeated the same on the attached jagged crack. I put it out in the sun and the next day went back to find a completely hardened surface and the crack on the outside barely distinguishable. I then sanded the entire outside of the pot and spray painted it. It looks brand new almost. The former break can be seen a bit but all I have to do is turn that part toward the wall. I admit I used the entire amount and I probably put it on thicker than it needed to be but considering the total opening was almost 15” I believe it to be the right amount. I will definitely be purchasing more and keeping it on hand!

I bought this to fix clay and pvc moulded sculptures and it works fantastically! I used it in other arts and crafts and it always gets the job done perfectly! However, it is a bit tricky to use at first. You need to cut the piece perfectly so there's a good ratio of the outer and inner layers and mix EXTREMELY well until you no longer see any blue color and it becomes a light grey and is soft to use. Once you know how to use it however it is an extremely good epoxy and is great for arts and crafts, especially since it dries white, can be sanded and painted too!

I wanted to thank you for resending the above order. I received the package in good order. Thank you very much for the excellent service. Goede aftersales contact met verkoper, eerste pakketje was zoek geraakt waarna verkoper me een direct een nieuwe heeft toegestuurd. Prima service van die bedrijf.

I have used this product to repair a plastic frame it’s easy to mould and once set a Dremel can shape it to get fine detail and it seem quite sturdy

It hardened and becomes part of the broken material. Used on my cracked luggage. Works perfectly.

Expired and not working