600 Lbs Quick Release Workbench Casters

Great casters. Works perfectly to raise for rolling, then can be lowered onto legs and temporarily removed

Works on my 32 by 60 work table moves easily with it loaded up with equipment but I only have about 400lb on them the retractable of the wheels seams to work ok

Well made. Simple mechanism. My workbench now sits solidly on the ground when in use but is easy to roll away when I am done. I have tried other caster systems with wheel locks but the bench remains too “wiggly” when in use. I mounted the brackets to the inside of the 2x4 legs so they are not a tripping hazard. Love the ease of bracket install and subsequent caster installation. Downsides: 1. No way to micro adjust leg height if floor not level. This can be solved with addition of leveling feet to the bottom of the legs. 2. Instructions are minimal. Calls for “1.4 inch” spacing from floor (why not 1 3/8 inches?). Comes with pan head screws for use without the brackets or thru and thru bolts for use with the brackets. They are NOT interchangeable but this is not spelled out in the instructions. Overall a very clever system that provides a safer, more solid workbench. Would have given it a “5” if not for the weak instructions.

These casters were exactly what I needed. My workbench is built from square tubing with adjustable feet, and installation was straightforward—I welded the back plates to the legs, painted them to match, then slid the casters in and secured them with the pins. The whole process was quick and hassle-free. This upgrade has made a big difference in my small shop. Being able to move the workbench easily has made rearranging and optimizing my workspace much more convenient. Highly recommend.

UPDATE: so when I pick up one side to move my desk through the sliding glass door, the wheels just fall under the feet of the desk. My plan is to fabricate 4 pieces of metal to bolt through the same holes as the bolt that holds everything together. The goal is to create a stop so that the wheel does not fall under the foot of my desk. I will update with a photo when I complete this part of the project. (My goal with all of this is to give the manufacturer ideas on product improvement, because I genuinely like the idea, I just want something better. While these were reasonably priced, Installation is not always easy. I bought angle steel at the local home depot, and some 1/4" bolts and nuts. I put 3 bolts in all but the one in the front of this shot (oversight to be corrected) Everything has a drop of red Loctite on it so I don't have to revisit any of this. If not screwing these into wood, use the machine screws that come with that have the counter sink head on them. 2 of these hold the bracket with the pin that makes for easy removal. The 1/4" bolts with the countersunk screw head stuck out too far and made it impossible to slide the wheels in. while this might not be a terrible solution for some, I DO want to take them off at some point. Regarding the wheels themselves. Everything kind of flops around, and while a better design would involve some type of spring system where the wheels don't flop under everything when picking up the desk and putting it down, that will require a design upgrade.. Positives. The angle steel I bought is really heavy. I don't believe it is going anywhere. The bottom counter sunk screw for the bracket is bolted onto the leg, the second on the angle. everything is really tight, and I am excited to use the new wheels, roll the desk out onto my deck, and work OUTSIDE when I work from home! I shared a picture (before I cut off the long screw and paint the angle semi-matte black) so you can sort of see what I did. One screw that is not visible went into the bottom part of the leg. The bracket hangs below that leg but not quite touching the floor when the wheels are up or off.

Work well. Decent price. You get the removable option which is pretty nifty if only you could purchase more of the mount plates.

Quality product, well built, $ fair price. The directions were brief, written in English with customary inch measurements, but in decimals instead of fractions. I used the brackets so that I can remove them to keep them out of the way. I’d highly recommend them for at least 600 lbs.

They are well built and work well. My only complaint is the instructions say to mount them a quarter inch from the bottom, which raises 3/4”. In reality it raises it 1 3/4”. So ya just have to mount them higher.

Delivery early well packaged top items

Help a lot in moving a heavy workbench. A+

Roues super faciles à installer et très pratique car en les enlevant on ne se prend pas les pieds dedans,

estaba en perfecto estado

Las ruedas están bien, pero llego incompleto el paquete como se ve en la foto, faltaba una placa de fijación Devolví el producto pero................... los precios se triplicaron al querer volverlo a comprar Paso de 790 pesos a 2,100 pesos Al parecer es un gancho para llevar primero a la compra para después vender más caro el producto