Underwater Epoxy Putty Stick

I used the sealant for a crack in a hot tub. Having already used a different product, I wasn't convinced that this would work and we would have to drain the tub and fibreglass the crack. After mixing the putty I applied the putty to the inside of the tub underwater, and it did just what it should and stuck to the tub. It was easy to mould and I was able to fill the crack. The leak stopped without having to apply it on the out side of the fibreglass, although I did for extra bonding. Thoroughly recommend this product, wear gloves when mixing, I didn't and the chemical burns a bit. I couldn't get gloves to enable me to apply this underwater, but would find some in the future. Excellent product.

Easy to apply and has worked well at stopping the leak so far

This stuff does exactly what it says on the tin. Have a crack in my toilet cistern top to bottom and it was leaking. Google said I’d have to replace the cistern. Found this and thought I’d try it. Emptied the cistern (though I don’t think you even have to) took 30 seconds to break some off and mix it in my hands. Applied it like putty to the crack. Waited an hour and it was hard and set. Refilled the cistern and not a sniff of a leak and this was a few weeks ago and it’s still perfect. I’ve since even used it (as I had loads left) to fill a hole where a top fixing blind fell down then drilled right into it, wall plug in and the blind is back up and stable. Poly filler wouldn’t have held it. Not often I review stuff but it’s done the jobs for me, and better than expected.

Works ok but overpriced

A pipe in our airing cupboard sprang a leak and this stuff fixed it up really well. Very easy to use, just cut off how much you need, knead it until the colours are mixed together and apply. I did find I needed to use more than I thought to get a good seal around the pipe, and it takes a while to get it to stick. Good stuff, though.

A great product for sealing a buried pipe from my pond that I accidentally punctured with a garden fork. I repaired the cut whilst water was seeping out by mixing the putty and moulding it around the pipe. It has remained fixed in place and the pump works as normal.

Does what I wanted it for, a bit messy but well worth the trouble.

Hot water cylinder was leaking around immersion heater fitting. Has solved the problem perfectly. Product comes in an airtight tube for protection. It is like a stick of seaside candy rock. The putty is surrounded by the activator. Simply cut off a length and knead until thoroughly mixed. Cut off more than you think you'll need. Press firmly into place. Stuck easily to wet copper. I had turned off the water but the leak was still weeping. A week later all is still good

When I purchase this epoxy, I was a little skeptical, but I ordered it any way and boy I am glad I did. I used this to cement a male clip that that had broken off in my swimming pool skimmer. My skimmer door couldn't be snapped in without that clip on one side. I found a replacement clip at an online pool parts supplier and used this epoxy to cement it back on. The clip is below water level. I cut a piece of the epoxy stick and mixed it up with my fingers and rolled it into a putty substance. I took the putty and applied it to the skimmer clip. I than went underwater and pushed it on the skimmer where I wanted it placed and waited 24 hours. The next day I checked, and the clip was cemented on there solid. I snapped the skimmer door in place and wallah! DONE. I give this underwater epoxy 5 Stars. It worked for me!!!! And I recommend this product!

Buon prodotto

Reparar tubería plástica para radiador coche.

Rapide et efficace

Top, durcit bien comme prévu et se fixe autant sur plastique que sur metal, nickel