H510, Compact ATX Mid-Tower PC Gaming Case, Front I/O USB Type-C Port, Tempered Glass Side Panel, Cable Management System, Water-Cooling Ready, Steel Construction, Black/Red

So this is my first build and using it for about a month it has been good. It has been really easy to build in with the cable mangement being really good and it being a nice looking case along with the front usb c header which is a nice extra as my motherboard does support usb type c header. The 3.5 headphone jack is good as you can use your everyday usual headphones/earphones which is awesome rather than having to use a seperate earphone and microphone jack, they do include a splitter if you happen to have that type of headset/headphone. The case has alright fans, they do the job but can get a tiny bit loud, the top fan was louder than the rear fan, I replaced them with bequiet fans. I dont have a AIO but you use one in this case. The negatives I have found is that the screws for mainly the back panel is degraded in quality and when taking off the back panel and trying to install them the screw is now a bit annoying to put into the case as they dont go in smoothly and they can not go straight in but rather wonky and then you have to use a bit of force when using your thumbs and the screws have degraded in quality to with them chipping off but they still work. The front panel isnt as bad but the scew has degraded in quality too. The warmth in this case is fine but nothing spectacular, I have heard from other people that it isn't the best airflow but the warmth is fine to be honest and isn't anything to take on board, I'm just mentioning that but to be honest I might be wrong. Overall it is a good case and you won't be disappointed, also I'd recommend going with the non-i cases as you can save money and the rgb lighting and extra features aren't really worth it but if you can find a good offer or you have the money and want RGB go for it, I was going to buy the i series but than I saw I could save a bit of money with going with the non i version. Also the paint scuffs of very easily near screw areas and it exposes the metal so paint quality is a bit meh but it would scuff off any other areas.

Let me get this straight, i brought this case back in December 23rd, so i had this case for almost a year WITHOUT A GPU for about 4 months and only just had my GPU finally for about 3 months, Temperature wise in this case, its alright, there are better cases with airflow but this one has enough even with that front side slot on the Side panel, no GPU overheating crashing over 80° 90° gaming for me, GPU only reaches about 65° to 75° for hours on end which is normal for GPU temperature wise, although when it gets into the summer, it can rise temperatures in the GPU for me about 1 to 2°c on average, other than that its alright enough, havent ran into any Hot Box issues with this case as people say, im guessing Airflow wise its a 50/50 for certain people, another thing to look out is that this case is mostly built on Negative pressure, with the stock case fans pulling air out as exhaust, leaving the GPU to mostly get its air from the back opening, which will cause it to build up dust from any small tight opening in the case, from the side panel openings to the bottom of the case, it can also depend how dusty your room can be as one of the pictures shows the ammount of fine dust my fan has pulled onto the exhaust vent in 3 MONTHS of use without a GPU, so dust wise youll be cleaning this case out alot more than others with a possitive air pressure.Building in this case is the most easiest thing ive ever worked with, as the standoffs are pre screwed in(im guessing with more cases these days) and theres a standoff thats replaced as a rod to help you guide the motherboard into place which can be very usefull for first time builders or just overall use, the cable management bracket is pretty good and stylish also to hide the cables behind the side panel itself, you could either run your 24 Pin infront of the cable bracket or behind to your liking, theres also guidelanes for the cables inorder to make it much more simpler to cable manage in this case.so overall for £70 this case is pretty good, with its build quality and being easy to build in the case and enough airflow that my GPU doesnt crash or melt, id say this case can be recommended.

The NZXT H510 Flow is a sleek and stylish computer case that offers excellent performance and functionality. It's the latest addition to NZXT's H-series lineup and comes with several upgrades from its predecessor, the H510.One of the standout features of this case is its improved airflow design. It comes with two pre-installed 140mm fans at the front and a 120mm fan at the back, which work together to create optimal airflow and keep your system running cool even under heavy load. The added mesh front panel also helps with increased air intake, making this case ideal for high-performance gaming builds.The H510 Flow also offers ample space for cable management, with a cable routing kit and Velcro straps included to keep your cables neat and tidy. The case also comes with a tempered glass side panel that provides a clear view of your components and adds to the aesthetic appeal of the case.Build quality is another area where the H510 Flow excels. The case is made of high-quality steel and has a premium feel to it. The paint finish is also excellent and resists scratches and marks well.Overall, the NZXT H510 Flow is an excellent choice for anyone looking for a stylish and functional computer case with great airflow and build quality. It offers ample space for high-performance components and provides an excellent platform for your gaming or workstation build. Highly recommended.

Acabamento muito bom, fácil organização de cabos.

Muito bom produto, acabamento e detalhes muito bem trabalhados, vidro de alta qualidade, e a loja foi perfeita, zero problemas.

Je suis heureux d'avoir recu mon boitier 1 semaine plus rapide que prévus.

Tem espaço.

Além de bonito tem espaço para mini itx, pra quem curte Pc mais compacto